Description
A room is lit from above, and that single fact decides how everything under it looks. A single pendant makes one pool of light and leaves the corners to the ceiling. A linear fixture spreads light along a table, a counter or a reception desk, and turns a long room into a composed one.
The GB4715 chandelier is a linear system of articulated arms, each carrying its own LED source, mounted on an aluminium frame with acrylic elements. It is offered in four lengths: 10 heads across 48 centimetres, 20 heads across 97, 30 across 145, and 40 heads across 190. The same fixture therefore scales from a small dining table to a long boardroom or restaurant bar without changing design language, which is what makes a lighting scheme look deliberate rather than accumulated.
Light is dimmable and remote controlled, and bulbs are included, so the fixture arrives complete rather than as a housing waiting for a further purchase. Input is 110 to 240 volts with G8 bases, which covers most of the world's wall sockets on one SKU. The body is aluminium and the finish is brushed, both of which matter in a ceiling fixture because they are what you look at when the light is off.
Warranty is three years, and the certification set is unusually broad for this class: CCC, CE, CQC, EMC, FCC, GS, LVD, PSE, SAA and UL. That is the paperwork that lets the same fixture be specified in a European restaurant, an American office and an Australian retail fit-out.
Good light does not decorate a room. It explains it.
What the fixture is made of
✦ Four scalable lengths. 10, 20, 30 and 40 head versions span 48 to 190 centimetres, so one design language covers a dining table and a commercial counter.
✦ Dimmable with remote. Brightness is adjusted from a remote rather than a wall dimmer, which suits retrofits where the switch circuit cannot be changed.
✦ Bulbs included. The fixture ships complete with LED sources in G8 bases, so it does not arrive as an empty housing.
✦ Aluminium body. A metal frame with a brushed finish holds alignment over time, where thin steel or plastic arms tend to sag.
✦ Acrylic diffusers. Softens the source so the fixture reads as light rather than as visible diodes.
✦ 110-240V input. One SKU covers most international mains voltages, which simplifies specification for multi-country projects.
✦ Broad certification set. CCC, CE, CQC, EMC, FCC, GS, LVD, PSE, SAA and UL listed, which is what commercial specification usually requires.
Fixture data
- ModelGB4715
- Configuration10 / 20 / 30 / 40 heads
- Dimensions48x47, 97x47, 145x47, 190x47 cm
- Body materialAluminium, brushed finish
- Diffuser materialAcrylic
- Light sourceLED, G8 base, bulbs included
- DimmableYes, remote control
- Input voltage110-240 V
- InstallationSemiflush mount
- Finish optionsBlack, white
- CertificationCCC, CE, CQC, EMC, FCC, GS, LVD, PSE, SAA, UL
- Warranty3 years
Where a linear fixture earns its cost
A dining table is the domestic case, and the 20 head version over a 1.8 metre table is the composition most people are actually looking for. Restaurants and bars use the 30 and 40 head lengths over a counter or banquette, where a single run of light defines the seating zone. Offices and studios choose the longer versions for meeting tables, because even illumination across a table beats one bright pool in the middle. Retail fit-outs use the 10 and 20 head versions over display counters. Two practical notes: the fixture needs a ceiling fixing rated for its weight, and 190 centimetres of aluminium is a two-person lift during installation, not a solo job.
Before you specify
Q. Which size for a dining table?
A 20 head fixture at 97 centimetres suits a table of roughly 1.6 to 1.8 metres. The 10 head version is for compact tables or a counter, and the 30 or 40 head lengths are for commercial runs.
Q. Are the bulbs included?
Yes. LED sources in G8 bases are included, so the fixture is complete on arrival. Replacements are standard G8 LED lamps available locally.
Q. How is it dimmed?
Through the supplied remote control. If you need wall-switch dimming, confirm that the driver configuration suits the dimmer type before installation.
Q. Can it be mounted on a sloped ceiling?
The mount is a semiflush type designed for flat ceilings. A sloped ceiling needs a suitable bracket and, in most cases, a longer drop, which is a site decision rather than a fixture decision.
Q. How much does the largest version weigh?
The 40 head, 190 centimetre version is a substantial aluminium run and needs two people and a fixing rated for the load. Do not hang it from a plasterboard ceiling without a proper anchor.
Q. Is it suitable for a commercial project?
The certification set covers CE, UL, PSE, SAA, GS and CCC, which is normally what a commercial specification asks for. Confirm the destination country's requirement against the certification list before ordering.
Specification support. Because the same fixture is specified across domestic and commercial projects, we confirm the length, finish and voltage against the drawing before dispatch. If a certification for your market is not in the list, we say so before the order ships rather than after the electrician arrives.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.