Description
Every Circuit Tells a Story. Every Connection Carries a Promise. The humble JST PH2.0 connector is the unsung hero of modern electronics — the silent bridge between microcontrollers and sensors, between batteries and voltage regulators, between imagination and function. When your prototype demands precision and your installation cannot afford a single loose contact, the Signal Weaver delivers with the quiet confidence of a component that understands its role in the larger system.
Crafted for makers who refuse to compromise on signal integrity, this extension harness kit spans the full PH2.0 pin-count spectrum — from tidy 2-pin power feeds to comprehensive 6-pin data buses. Each lead is terminated with a factory-crimped male connector on one end and a female on the other, eliminating the variable of hand-crimping from your reliability equation. The 26AWG stranded copper conductors flex without fatigue, while the tin-plated contacts resist oxidation through hundreds of mating cycles.
Whether you are routing sensor arrays through a tight enclosure, building a modular drone wiring loom, or extending the reach of an I2C peripheral on a crowded breadboard, the Signal Weaver transforms a fragile point-to-point hack into an engineered sub-assembly. This is not a bag of loose jumpers. This is a deliberate extension of your design intent — pre-terminated, color-coded, and ready to make your signal path as clean as your code.
Precision begins where the wire meets the pin.
Key Features
- ✦ Full Pin-Count Range (2–6 Pin): One kit covers every PH2.0 scenario — power, I2C, UART, SPI, and custom pinouts
- ✦ Pre-Crimped at Both Ends: Male-to-female configuration eliminates field crimping, cold joints, and intermittent contacts
- ✦ 26AWG Stranded Copper: Flexible enough to route through tight enclosures, durable enough for vibration-prone installations
- ✦ Tin-Plated Contacts: Oxidation-resistant finish maintains low contact resistance across the connector's service life
- ✦ Color-Coded Conductors: Instant visual identification reduces wiring errors during assembly and debugging
- ✦ 2-Pack Economy: Two of each pin-count configuration — one for the build, one for the spare bin
Technical Specifications
- Connector Series: JST PH2.0 (2.0mm pitch)
- Pin Configurations: 2-Pin, 3-Pin, 4-Pin, 5-Pin, 6-Pin (2 pieces each)
- Wire Gauge: 26AWG stranded copper conductor
- Contact Material: Tin-plated phosphor bronze
- Configuration: Male-to-Female (one connector each end)
- Insulation: PVC, color-coded per conductor
- Applications: Arduino, ESP32, Raspberry Pi, drone wiring, sensor arrays, prototyping
- Package Contents: 10 wires total (2× each pin-count)
Application Scenarios
From the electronics hobbyist debugging a sensor array on a Sunday afternoon to the professional integrator building a fleet of IoT sensor nodes, the Signal Weaver finds its home wherever reliable low-voltage connections matter. Drone builders rely on these extensions to route flight controller signals through carbon-fiber frames without a single splice. 3D printer enthusiasts use them to extend end-stop switches and thermistor leads to the control board. Embedded systems engineers keep a kit in the lab drawer for the moment a prototype needs just six more inches of reach between the microcontroller and the display module. When the connection must survive vibration, thermal cycling, and the rigors of field deployment, pre-crimped consistency beats hand-crimped hope every time.
Frequently Asked Questions
Q: Are these genuine JST connectors or generic equivalents?
A: These are high-quality JST PH2.0-compatible connectors manufactured to the same 2.0mm pitch standard. They mate securely with all JST PH2.0 headers and receptacles commonly found on development boards, battery management modules, and sensor breakout boards.
Q: What is the maximum current these wires can handle?
A: At 26AWG, each conductor is rated for approximately 2.2A continuous current in free air. For power applications requiring higher current, we recommend using multiple parallel pins or stepping up to a larger connector series.
Q: Can I cut these wires to custom lengths?
A: Yes. The wires can be cut and re-terminated at the desired length, though doing so sacrifices the factory-crimped connector on the cut end. For most applications, the stock length provides sufficient reach while minimizing signal resistance.
Q: Are the pin counts labeled or color-coded?
A: Each conductor within a multi-pin wire is individually color-coded. The connector housings themselves are not marked, but pin count can be visually identified by housing width — a quick glance is all it takes.
Q: Will these work with my ESP32/Arduino/Raspberry Pi project?
A: Absolutely. JST PH2.0 is the standard connector pitch for countless development board peripherals — I2C OLED displays, UART GPS modules, SPI sensor breakout boards, and battery connectors all use this format. The 2-pin through 6-pin range covers virtually every common prototyping scenario.
EastSupplier Promise: Every component we list passes a multi-point inspection for contact integrity, conductor continuity, and housing fit. We stock what we sell — your Signal Weaver kit ships from our warehouse within 24 hours of order confirmation.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.