Description
Air is the cheapest thing you will ever buy and the most expensive thing to get wrong. A PCP reservoir charged to the wrong pressure, or charged with moisture that condenses inside the cylinder, is a problem that shows up at the worst possible moment. The Pressure Room is built around the two variables that actually decide whether a fill is safe and repeatable: how clean the air is, and whether you know exactly what pressure and temperature the pump is running at.
Filtration comes first. A large carbon separator sits in the output path and is reusable rather than disposable, trapping oil and water aerosol before it reaches the reservoir, so the air delivered to an air rifle, air pistol, paintball marker, or HPA tank is clean and dry rather than merely compressed. A visible analogue gauge reports line pressure while an LED display reports temperature, and running both at once means the operator is never guessing. The guidance is unambiguous: stop at 4500 PSI, or at 70 degrees Celsius, whichever arrives first. A 250 watt brushless motor drives the piston stage to a maximum of 4500 PSI or 30 megapascals, filling a half litre tank from empty to 300 bar in roughly twenty minutes, and from 200 bar to 300 bar in about eight - which is the cycle most owners actually run, topping up between sessions rather than filling from zero.
Cooling is handled by two internal fans, because heat is what shortens the working life of any compressor that runs at this pressure. The unit accepts both 110 and 220 volt AC through an external converter, and it also runs from a car battery, so a fill is possible at a range, on a field, or in a car park rather than only at a bench in a garage. An eight millimetre quick connector makes the transfer hose a two-second job, and the whole unit carries a handgrip that makes it genuinely portable rather than nominally so. Whether the requirement is a single air rifle or a club's worth of markers, the compressor is rated to meet it with CE, FCC, and UL certification behind it.
Clean air, known pressure, honest temperature. Everything else is a delay.
Key Features
- ✦ 4500 PSI / 30 MPa output from a 250W brushless motor
- ✦ Large reusable carbon separator traps oil and water before the reservoir
- ✦ Visible pressure gauge plus LED temperature display for live monitoring
- ✦ Dual power - 110V/220V AC through the converter, or direct from a car battery
- ✦ Twin internal cooling fans to control heat during long fills
- ✦ 8mm quick connector for fast, tool-free hose changes
- ✦ Portable with handgrip and rated to 2700 RPM inflation rate
- ✦ CE, FCC and UL certified for air rifles, air pistols, paintball and HPA tanks
Technical Specifications
- Brand: Nuoge Technology
- Model Number: NG008
- Structure: Piston pump
- Drive: 250W brushless motor
- Maximum Pressure: 4500 PSI / 30 MPa
- Inflation Rate: Up to 2700 RPM
- Fill Time (0.5L tank): Approx. 20 minutes from 0 to 300 bar
- Top-up Time: Approx. 8 minutes from 200 to 300 bar
- Filtration: Large reusable carbon separator, oil and water free
- Pressure Readout: Visible analogue gauge
- Temperature Readout: LED display
- Cooling: Two built-in fans
- Connector: 8 mm quick connector
- Power Supply: 110V / 220V AC via external converter; car battery capable
- Operating Limit: Stop at 4500 PSI or 70 degrees C, whichever comes first
- Application: PCP air rifles, air pistols, paintball markers, HPA tanks
- Certification: CE, FCC, UL
Where It Belongs
Individual air rifle and air pistol owners keep it on a bench as their only fill source, running a top-up cycle of about eight minutes between sessions rather than driving to a dive shop. Paintball players and small clubs use it at the staging area, where the car battery lead means a fill is possible from a vehicle rather than a wall socket. Hunters and pest controllers value the combination of portability and clean-air filtration, because a reservoir charged with damp air corrodes from the inside and no amount of external care compensates. Owners of HPA tanks who would otherwise pay per fill find the compressor pays for itself within a season, and technicians working on pneumatic systems use it as a portable pressure source for testing. Because it accepts both mains voltages through the supplied converter and can also run from a battery, the same unit works in a home workshop, on a range, and in a vehicle without modification.
Frequently Asked Questions
Q: What pressure does it reach?
A: The compressor produces up to 4500 PSI, equivalent to 30 megapascals, which covers the working pressure of air rifles, air pistols, paintball markers, and standard HPA tanks.
Q: How long does a fill take?
A: Filling a half litre tank from empty to 300 bar takes roughly twenty minutes. Topping up from 200 bar to 300 bar - the cycle most owners run between sessions - takes about eight minutes.
Q: Why does filtration matter so much?
A: Compressed air carries moisture and oil aerosol into the reservoir, where it condenses and causes internal corrosion. This compressor uses a large reusable carbon separator in the output path so the air arriving at your cylinder is clean and dry, which protects both the tank and the rifle's valve and regulator.
Q: Can I run it from my car?
A: Yes. In addition to 110 and 220 volt AC through the supplied converter, the unit can run from a car battery, so a fill is possible away from mains power.
Q: When should I stop the fill?
A: Stop when the pressure reaches 4500 PSI, or when the temperature reaches 70 degrees Celsius, whichever happens first. The analogue gauge and the LED temperature display are both visible during operation so you can monitor both continuously.
Q: What is it compatible with?
A: It suits PCP air rifles, air pistols, paintball markers, and HPA tanks. The 8 millimetre quick connector accepts standard transfer hoses, and the unit is CE, FCC, and UL certified.
The EastSupplier Promise
Every unit ships from our overseas warehouse network after a hands-on inspection pass. We verify the plug type, count the parts, and confirm the unit powers on before it leaves the shelf. If a component arrives damaged, our support team responds within one business day with a replacement or a refund - not a script. We have supplied industrial buyers, workshops, and distributors since 2010, and the same standard applies to a single order as to a pallet.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.