Description
Audio recorded on a camera microphone is usually the first thing an editor throws away. The reason is distance: the microphone sits on the hot shoe, the subject stands two metres away, and what arrives is a close-up of the room. A long-bodied super-cardioid microphone changes the geometry, because the interference tube in front of the capsule rejects everything outside a narrow cone and holds the subject in front of the camera while the walls fall away.
This one is 360 mm of aluminium-bodied shotgun microphone, single-directional, with a frequency response from 100 Hz to 16 kHz and a sensitivity of minus 45 dB at close range. It runs on a 1.5 V cell rather than phantom power, which is the detail that matters for DSLR and camcorder work: no external preamp, no adapter, no cable that only one camera supports.
The kit arrives ready to shoot. Windproof foam for outdoor interiors, a bar clamp, a hot shoe mount, a coiled cable and a printed instruction sheet. Point it at the subject, keep the capsule within about thirty degrees of the mouth, and the difference against the built-in microphone is immediate and slightly embarrassing in hindsight.
The picture tells the story. The microphone decides whether anyone believes it.
Why a long body changes the sound
- ✦ Super-cardioid pickup pattern that rejects the sides and the room behind
- ✦ 360 mm interference tube for directional reach across a normal interview distance
- ✦ 100 Hz to 16 kHz response with filtered low end
- ✦ Battery powered at 1.5 V, no phantom power supply needed
- ✦ Foam windshield, bar clamp, hot shoe mount and cable included
- ✦ Works with Canon, Nikon, Sony DSLR, mirrorless and camcorder inputs
- ✦ 390 g aluminium body with a 22 mm diameter
Acoustic data
- Model: CF-01
- Transducer: condenser, capacitive conversion
- Pattern: single directional, super-cardioid
- Frequency response: 100 Hz to 16 kHz
- Sensitivity, close: minus 45 dB
- Sensitivity, distant: minus 38 dB
- Output impedance: 1 kOhm close, 2.3 kOhm distant
- Power: DC 1.5 V cell
- Length: 280 mm or 360 mm
- Body: 360 x 22 x 22 mm, 390 g
- Included: windshield, bar clamp, hot shoe seat, output cable, instruction sheet
- Connection: 3.5 mm input on the camera
Recording situations
Documentary and interview work is the primary use: one subject, one camera, one microphone that holds the voice and softens the room. Vloggers use it because the built-in microphone on a compact camera sounds thin at arm's length, and a shoe-mounted shotgun solves that without a boom operator. Corporate video teams shoot training material in offices where the air conditioning and the corridor conversation are constant, and a narrow pickup pattern is the only practical defence. Event videographers clip the shorter version to a camera for ambient-plus-speech coverage. Students and independent filmmakers buy it as the first microphone that behaves like a real one.
Audio questions
Q: Does it need phantom power?
A: No. It runs on a 1.5 V cell, which is what makes it usable on consumer camera inputs that cannot supply phantom power.
Q: Which length should I choose?
A: The 360 mm version gives tighter rejection and better reach for interviews. The 280 mm version is easier to hand-hold and less obtrusive when the camera has to stay close.
Q: How close does the subject need to be?
A: Within roughly a metre and a half, pointed at the mouth. A shotgun rejects the sides, but it does not create presence at distance. Every microphone rewards proximity.
Q: Will it work with a phone?
A: The output is a 3.5 mm plug. A phone needs the right adapter and a camera app that accepts an external input, so a dedicated camera or recorder is the simpler path.
Q: What does the windshield actually remove?
A: Breath noise, light wind and the handling rumble that travels up a boom. It will not save a shot in a gale, but it turns an unusable exterior take into a usable one.
Q: Can I record two subjects with it?
A: One microphone, one cone. For two people talking across a table, place it between them and accept a wider sound, or use the twin pack and give each speaker their own input.
Q: Is there a low-cut switch?
A: The response is already shaped to roll off below 100 Hz, which removes most handling rumble and room boom. If your camera has a low-cut filter, leave it on as well.
Q: How long does the battery last?
A: A fresh 1.5 V cell covers several hours of intermittent recording, which is a normal shoot day for interview work. Carry a spare, since the microphone gives no warning before it fades.
Q: Can I mount it on a boom instead of the camera?
A: The included clamp accepts a standard boom thread, and the low handling noise means it works overhead. Point it down at the subject rather than straight along the room.
Q: Will it pick up camera handling noise?
A: Less than an on-camera condenser, because the body is long and the mount is isolated. For handheld work, hold the camera still and let the shoe mount do its job rather than gripping the microphone body.





Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
