Description
Magnet fishing is one of the few retrieval methods that works when visibility is zero and sonar is useless. You are not searching, you are sweeping: cast, drag, feel for the change in pull, then haul. What decides whether a sweep finds anything is the geometry of the magnet face and how much holding force it develops against rusted steel that has been underwater for years.
This is a double-sided neodymium recovery magnet, offered in three pull ratings: 140 kg, 180 kg and 300 kg. Two working faces mean the magnet grips on contact from either side, which matters when the target is a railing, a bridge fitting or a submerged beam rather than a flat plate on the riverbed. The housing rotates on its mount, so you can angle the face to the surface you are sweeping instead of dragging it flat and snagging on every ledge. Neodymium is the strongest permanent magnet family in common use, and the double-sided arrangement concentrates that field on two faces rather than wasting it inside a single-sided pot.
The practical part is the setup around the magnet. A 300 kg rated pull will not be defeated by hand, so the line you attach matters as much as the magnet: a rated static rope, a secure knot or threaded connection, and gloves that will not let a magnet snap onto a steel toe cap with fingers in between. Work from a stable bank, keep the line clear of your feet, and never put a hand between the magnet and a steel surface. Used with that discipline, the same tool retrieves dropped tools, anchors, keys and bikes, and clears scrap metal out of the water at the same time.
The river keeps what it is given. A strong enough face is how you ask for it back.
What Sets It Apart
-
Three pull ratings
140 kg, 180 kg and 300 kg versions, so you can match holding force to the target instead of over-specifying a magnet you then cannot release. -
Double-sided face
Two working faces grip on contact from either orientation, which helps on railings, beams and uneven metalwork where a single-sided pot only catches one angle. -
Rotatable mounting
The housing turns on its mount so the face can be angled to the surface being swept rather than dragged flat. -
Neodymium core
The strongest permanent magnet family in general use, which is why a hand-sized body can develop hundreds of kilograms of holding force. -
Heavy lifting as well as fishing
Rated pull force makes it useful for holding, lifting and fixture work in a workshop as well as retrieval from water. -
Sized for real line handling
The 140 kg option is the sane first magnet; step up to 180 kg or 300 kg once you know what your local water holds and what your rope can take.
Technical Specifications
- Magnet materialNeodymium (NdFeB)
- ConfigurationDouble-sided, rotatable housing
- Pull force options140 kg, 180 kg, 300 kg
- Intended useMagnetic fishing, retrieval, heavy lifting
- Working facesTwo
- MountRotatable eye fitting with threaded centre
- Target materialsFerrous steel and iron
- Not suitable forAluminium, stainless alloys, brass, concrete
- Line requirementRated rope matched to pull force (not included)
- SafetyGloves and eye protection advised
Where It Belongs
Magnetic fishing clubs use these on canal towpaths, bridges and jetties where the bottom is littered with dropped tools and bike frames. Farmers and boat owners use the same magnet to fish dropped hardware out of tanks, bilges and wells. Workshops keep a 140 kg unit for holding steel during welding and for picking up swarf. Recovery divers, scrap collectors and volunteer canal clean-up crews use the larger 180 kg and 300 kg versions, where the target may be a submerged railing or a chunk of machinery rather than a hand tool.
Questions Buyers Ask Before Ordering
Q: What does the 300 kg rating actually mean?
It is the rated holding force against a clean, flat, thick steel plate under ideal conditions. Real targets underwater are rusted, painted and uneven, so expect a fraction of that figure in practice. The rating is for comparing magnets, not for predicting a specific retrieval.
Q: Which pull force should I start with?
140 kg is the sensible first magnet for canals and towpaths where the targets are hand tools and small steel. Move to 180 kg for anchors and bike frames, and to 300 kg only when you have a rope, a bank and a technique that can handle a magnet you cannot pull off by hand.
Q: Will it stick to stainless steel or aluminium?
No. Neodymium magnets hold ferrous metals: steel and iron. Most stainless alloys, aluminium, brass and concrete are effectively non-magnetic, which is why cans and some boat fittings will not respond.
Q: How do I release it from something it has grabbed?
Slide it rather than pulling straight off, or lever the edge with a non-magnetic tool. A 300 kg face will not come free by hand, so plan the release before you attach the line.
Q: Is a rope included?
The variants differ by pull force and shipping region. Line is not part of the variant options, so pair the magnet with a rated static rope and a secure connection matched to its pull force.
Q: Can I use it for lifting in a workshop?
Yes. The same holding force that makes it a recovery tool makes it useful for holding steel plate, beams and fixtures during fabrication, provided the load is rigged so it cannot slide off the face.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.