The Nomad Array | 110W Foldable Portable Solar Panel for Power Stations

Economisez 20%
EastSupplier PlatformSKU: 1005009520245746-110W Solar panel-United States

Color: 110W Solar panel
Prix:
$193.16 $241.45

Frais de port calculés au paiement

Stock:
111 en stock, prêts à être livrés

Description

The Grid Is a Luxury. Charge Anyway. When you are 40 miles from the nearest outlet, the sun is not a weather condition — it is infrastructure. The MHPOWOS 110W Portable Solar Panel converts that infrastructure into usable DC power with monocrystalline cell efficiency that competes with rooftop installations in a form factor that folds into a briefcase. 110 watts of rated output at 20V — enough to charge a 500Wh portable power station from 20% to 80% in under five hours of direct sunlight, or to maintain a 12V deep-cycle battery indefinitely during extended overlanding trips.

The panel array uses ETFE-laminated monocrystalline cells — the same fluoropolymer encapsulation used in aerospace and architectural membrane structures. Unlike PET-laminated panels that yellow and delaminate after two seasons of UV exposure, ETFE maintains optical clarity and mechanical integrity across a -20°C to +65°C operating range. Each panel segment is sewn into a 600D Oxford fabric backing with reinforced corner grommets — hang it from an awning, strap it to a roof rack, or stake it into the ground at the optimal sun angle with the integrated kickstand.

Output is delivered through a 20V DC5521 barrel connector with an included adapter kit covering Anderson Powerpole, MC4, 8mm DC, and 5.5x2.1mm interfaces — making the Nomad Array compatible with Jackery, EcoFlow, Bluetti, Goal Zero, Anker, and any power station that accepts 12-30V solar input. A built-in USB-A and USB-C PD port on the junction box lets you charge phones, tablets, and headlamps directly from the panel without an intermediate power station. The panel weighs 4.2 kg folded and deploys in under 30 seconds.

You do not need permission from the grid. You need a panel — and enough daylight to use it.


Key Features

  • ✦ 110W Monocrystalline Array: High-efficiency ETFE-laminated cells deliver 23% conversion efficiency — competitive with residential rooftop panels. Rated output of 110W at 20V under Standard Test Conditions (1000W/m², 25°C).
  • ✦ ETFE Fluoropolymer Encapsulation: UV-stable, mechanically durable surface layer that resists yellowing and delamination across a -20°C to +65°C operating range. Outperforms PET-laminated panels in extended field use.
  • ✦ Universal Power Station Compatibility: DC5521 output with included adapter kit covering Anderson Powerpole, MC4, 8mm DC, and 5.5x2.1mm connectors. Compatible with Jackery, EcoFlow, Bluetti, Goal Zero, Anker, Rockpals, and 50+ other brands.
  • ✦ Integrated USB-C PD + USB-A Ports: Charge phones, tablets, cameras, and headlamps directly from the panel's junction box — no power station required. USB-C PD delivers up to 18W; USB-A delivers 5V/2.4A.
  • ✦ 600D Oxford Fabric Backing: Durable, water-resistant, and tear-resistant fabric construction with reinforced corner grommets for hanging or staking. Folded dimensions: 54 × 36 × 5 cm. Deployed dimensions: 170 × 54 cm.
  • ✦ Integrated Adjustable Kickstand: Set the optimal sun angle without external props. The aluminum kickstand locks at 30°, 45°, and 60° positions. Ground stakes included for windy conditions.
  • ✦ 4.2 kg Total Weight: Light enough for backpack-portable solar, substantial enough for vehicle-based overlanding. Folds into a briefcase form factor with carry handle and magnetic closure.

Technical Specifications

  • Brand: MHPOWOS
  • Rated Power: 110W (STC: 1000W/m² irradiance, 25°C cell temperature)
  • Cell Type: Monocrystalline silicon with ETFE lamination
  • Conversion Efficiency: 23% (cell-level)
  • Output Voltage: 20V DC (nominal), open-circuit 24V
  • Output Current: 5.5A (max power point)
  • DC Output: DC5521 barrel connector (5.5mm x 2.1mm)
  • USB Output: USB-C PD 18W (5V/3A, 9V/2A, 12V/1.5A) + USB-A 5V/2.4A
  • Adapter Kit: Anderson Powerpole, MC4, 8mm DC, 5.5x2.1mm to DC5521
  • Folded Dimensions: 54 × 36 × 5 cm (21.3 × 14.2 × 2.0 in)
  • Deployed Dimensions: 170 × 54 cm (66.9 × 21.3 in)
  • Weight: 4.2 kg (9.3 lbs)
  • Operating Temperature: -20°C to +65°C (-4°F to +149°F)
  • Backing Material: 600D Oxford fabric with PU coating (water-resistant)
  • Included Accessories: Adapter kit, ground stakes (4x), carabiner clips (4x), carry case

Application Scenarios

Designed for overlanders, van-lifers, campsite base-camp operators, emergency-preparedness households, and anyone generating solar power away from fixed infrastructure. The 110W output pairs ideally with 300-1000Wh portable power stations — deploy the panel at sunrise, connect to a Jackery Explorer 500 or EcoFlow River 2 Pro, and maintain a full battery through a full day of laptop charging, camera batteries, LED lighting, and 12V refrigerator operation. The integrated USB ports serve as a zero-infrastructure charging station for phones and tablets during group camping trips. In emergency scenarios — extended power outages, hurricane aftermath, wildfire-evacuation staging — the Nomad Array provides independent phone/radio/medical-device charging without fuel, noise, or maintenance requirements.

Frequently Asked Questions

Q: Will this panel charge my Jackery/EcoFlow/Bluetti power station?

A: Yes — the included adapter kit covers the input connectors used by virtually all major portable power stations. The 20V DC5521 output is within the solar input range (typically 12-30V) accepted by Jackery Explorer, EcoFlow River/Delta, Bluetti EB/AC, Goal Zero Yeti, and Anker PowerHouse series. Use the appropriate adapter from the kit and connect directly to the power station's solar/DC input port.

Q: How long does it take to charge a power station?

A: Under direct midday sun (1000W/m² irradiance), the 110W panel delivers approximately 90-100W of usable output (accounting for cable and conversion losses). Rough estimates: a 300Wh station charges in ~3.5 hours, a 500Wh station in ~5.5 hours, and a 1000Wh station in ~11 hours. Cloud cover, panel angle, and ambient temperature reduce output proportionally. For mission-critical applications, pair two panels in parallel for 220W total input.

Q: Is the panel waterproof?

A: The ETFE-laminated solar cells and 600D Oxford fabric are water-resistant (IPX4 equivalent) — they can withstand rain, morning dew, and snow without damage. The junction box (containing the USB ports and DC output) is IP65-rated. Do not submerge the panel or leave it in standing water. After use in wet conditions, dry the panel thoroughly before folding for storage.

Q: Can I connect two panels together for more power?

A: Yes. You can connect two Nomad Array panels in parallel using a DC5521 Y-splitter cable (not included). Parallel connection doubles the current at the same voltage — two 110W panels deliver ~220W at 20V, compatible with power stations that accept up to 10A solar input. Series connection is not recommended because it would exceed the 30V maximum input of most portable power stations.

Q: How does ETFE compare to PET lamination?

A: ETFE (ethylene tetrafluoroethylene) is a fluoropolymer with superior UV stability, mechanical strength, and chemical resistance compared to PET (polyethylene terephthalate). PET-laminated panels typically show visible yellowing and a 10-15% efficiency loss after 1-2 years of regular outdoor use. ETFE maintains optical clarity and mechanical integrity for the panel's rated lifespan (5+ years under normal use). It is the same material used in high-end foldable panels from brands like Renogy and EcoFlow.

Customer Reviews

Customer Reviews

Based on 4 reviews
75%
(3)
25%
(1)
0%
(0)
0%
(0)
0%
(0)
R
Rachel S.
Light enough to carry, powerful enough to matter

I hike into remote campsites and the 4.2 kg weight is manageable in a pack frame. Deployed it on a rocky beach in Olympic National Park — the corner grommets let me stake it against the wind. Charged my power station and two phones simultaneously with the USB ports. The 600D fabric feels like it will last years.

T
Tom H.
Emergency preparedness done right

Bought this after a 4-day power outage last winter. Tested it with a Jackery 500 — charged from 30% to full in about 4.5 hours of direct sun. The fold-flat design stores behind my garage shelving. Knowing I can keep phones and a CPAP running indefinitely without fuel is worth every dollar.

N
Nina W.
Perfect companion for my EcoFlow River 2 Pro

The included adapter kit had the right connector for my EcoFlow. Under midday sun I am getting 95-100W from the panel — close enough to the rated 110W considering cable losses. The kickstand is sturdy but I wish it had one more locking position between 45 and 60 degrees for late-afternoon sun.

C
Chris D.
ETFE lamination is the real deal

Used PET-laminated panels for two seasons before switching to this — the difference in UV resistance is obvious. After 3 months of daily deployment in the Arizona sun, the MHPOWOS panel shows zero yellowing. The USB-C port is a nice touch for topping up my phone while the power station charges.

Payment and Security

PayPal

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

Estimer la livraison

You may also like

Recently Seen