Description
Water waits for no one, but it answers to copper. The Copper Sentinel is a 220V immersion heating element that turns any tank, barrel, or reservoir into a controlled heat source. Threaded DN32 mounting and an integrated thermostat make it a drop-in upgrade for water heaters, livestock watering systems, and industrial process vessels that need reliable heat without a full plumbing overhaul.
The element is built around a copper sheath, chosen for its thermal conductivity and corrosion resistance in water service. At 280mm of tube length, it reaches deep into the vessel for efficient heat transfer, while the 8mm tube diameter keeps the element compact enough for narrow fittings. The built-in thermostat cuts power at the set temperature, protecting the element and the liquid from overheating and cutting standby energy waste.
Installation is a wrench job, not a plumbing project: thread it into the port, wire the terminal, set the temperature, and it works. Farmers, workshop owners, and maintenance crews keep these on the shelf precisely because they are simple, repairable, and predictable. When a heater fails, the fix is an element swap that takes one person and twenty minutes, not a service call that takes a week.
Beyond the workshop, the same element solves seasonal problems: keeping a storage tank above freezing, warming rinse water for a production line, or holding a process bath at a steady temperature. The thermostat does the watching so you do not have to, and the copper construction shrugs off the mineral buildup that shortens lesser elements.
Reliability is a metal, and this one conducts.
Key Features
- ✦ Copper sheath for fast heat transfer and corrosion resistance
- ✦ Integrated thermostat for automatic temperature cutoff
- ✦ DN32 / 1-1/4 inch BSP threading for standard tank ports
- ✦ 280mm tube length reaches deep into the vessel
- ✦ 220V operation for residential and light commercial service
- ✦ Simple wrench-and-wire installation, fully serviceable
- ✦ Thermostat reduces standby energy waste
Technical Specifications
- Product: Immersion water heater element
- Material: Copper
- Thread Size: DN32 / 1-1/4 inch BSP / 42mm
- Tube Length: 280mm
- Tube Diameter: 8mm
- Voltage: 220V
- Thermostat: Integrated temperature control
- Installation: Thread-in, wrench-fit
- Maintenance: Replaceable as a unit
- Application: Water tanks, barrels, livestock waterers, process vessels
Where It Serves
Rural workshops heat rinse water in drums for parts cleaning, and the element turns a passive barrel into a working station. Farmers keep drinking water from freezing in winter tanks, where a thermostated element runs only as needed and pays for itself in one hard frost. Maintenance teams restore old electric water heaters with a single element swap instead of replacing the whole unit. Anyone with a threaded port and a need for hot water understands: a good immersion element is worth more than a new heater.
Frequently Asked Questions
Q: What size tank is this element suited for?
A: With a 280mm tube length, it suits small to medium tanks and barrels. Larger vessels may need a longer or higher-wattage element.
Q: How does the thermostat work?
A: It senses the element temperature and interrupts power when the set point is reached, then re-engages as the liquid cools.
Q: Can I use it outdoors in winter?
A: Yes, this is a common anti-freeze solution for livestock waterers, provided the element stays submerged and the wiring is protected.
Q: Does it come with a power cord?
A: No, it is a bare element with terminal connections. Wire it to your supply through a properly rated switch or controller.
Q: Is copper safe for drinking water?
A: Copper is a standard material in water heating. For potable systems, follow local electrical and plumbing codes and use proper grounding.
Q: How do I know the thread will fit my tank?
A: The DN32 / 1-1/4 inch BSP / 42mm thread covers the most common tank port sizes. Measure your port before ordering.
Q: Can I replace the element without draining the tank?
A: Partially, in most designs. The element sits in the lower port, so you may need to lower the water level below the port before removal.
Q: What wattage is this element?
A: This is a compact 220V element suited to tank and barrel service. Confirm the wattage marking on the element or listing before wiring to ensure it matches your vessel size.
Q: How long does it take to heat a full tank?
A: Heating time depends on wattage, water volume, and starting temperature. As a guide, expect tens of minutes for a typical household tank; large volumes take proportionally longer.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.