Description
Your monitor should follow your eyes, not the other way around. The Cantilever is a full-motion monitor mount built from cold-rolled steel, designed to clamp onto a 35 millimeter pipe or tube and hold screens up to 27 inches with a rated load of 20 kilograms per screen. It rotates a full 360 degrees and tilts 90 degrees up and down, which sounds like a spec sheet and behaves like a quiet revolution in your posture.
The steel is the story. Cold-rolled construction gives the arm the stiffness to hold a monitor exactly where you put it, with no sag and no drift, and the pipe clamp accepts tube diameters from roughly 35 to 35.8 millimeters, so it mounts on the standing desks and rigs that use tubular frames. The VESA plate covers 75x75 and 100x100 hole patterns, which fits the overwhelming majority of modern monitors.
For standing desks, the payoff is immediate: move the desk up for standing work and the screen travels with you instead of staying glued to a fixed height. For multi-monitor rigs, the 360-degree rotation means portrait and landscape are a twist away. Tilt range of 90 degrees up and down covers everything from a reclined viewing angle to a nearly vertical collaborative position.
Installation is straightforward and reversible. The clamp mounts to the pipe or wall plate, the VESA bracket carries the screen, and the arm holds its position with no drift, which is the test that separates steel arms from stamped sheet metal. If you later change desks or monitors, the mount comes down and moves with you, which is why it keeps appearing in setups that get upgraded every couple of years.
Buy a mount for the desk. Keep it for the back it saves.
Key Features
- ✦ Cold-rolled steel construction rated for up to 20 kg per screen
- ✦ 360-degree rotation and 90 degree up-down tilt range
- ✦ Fits pipe and tube diameters of 35-35.8 mm
- ✦ VESA compatibility: 75x75 and 100x100 hole patterns
- ✦ Supports monitors up to 27 inches
- ✦ Wall-mount capable with included hardware
Technical Specifications
- Model: T900-ARM full-motion mount
- Material: Cold-rolled steel
- Max load: 20 kg per screen
- Monitor size: Up to 27 inches
- Pipe fit: 35-35.8 mm diameter tube
- VESA patterns: 75x75 mm and 100x100 mm
- Rotation: 360 degrees
- Tilt: 90 degrees up / 90 degrees down
- Installation: Wall mounting, clamp on tube or pipe
- Best for: Standing desks, workstations, multi-monitor rigs
Who It Is For
The Cantilever earns its place in the setups where comfort is a productivity metric: standing desks in home offices, workstations shared by two shifts of different heights, and content creation rigs where a second monitor swings between landscape and portrait. It is also a favorite in labs and workshops where a screen needs to move out of the way for bench work, then swing back into view on demand. For anyone who has spent a year craning at a fixed monitor, the first week with this mount is a small revelation.
Frequently Asked Questions
Q: Will it fit my monitor?
If your monitor is up to 27 inches and uses a standard 75x75 or 100x100 VESA pattern, it will fit. Most monitors from 10 to 27 inches use one of these patterns.
Q: What diameter pipe does it clamp to?
The clamp fits pipe and tube diameters from about 35 to 35.8 mm, which covers the tubular frames used by most standing desk and rig systems.
Q: How much weight can it hold?
The mount is rated for up to 20 kg per screen, which is far beyond the weight of most 27 inch monitors.
Q: Can it hold a monitor in portrait orientation?
Yes. The 360-degree rotation lets you swing the screen between landscape and portrait in seconds.
Q: Is wall mounting possible?
Yes. The mount includes wall-mount hardware in addition to the pipe clamp option.
Q: Does it work with standing desks?
Yes, that is one of its primary use cases. Mount it on the desk frame or a pipe so the screen moves with the desk surface.
Q: What tools do I need for installation?
Standard hex and Phillips tools included in the kit. The whole install typically takes under 30 minutes.
Q: Will the arm sag over time?
No. The cold-rolled steel arm holds its position without drift, which is the main difference between this mount and lighter stamped-metal alternatives.
Q: Can I mount two arms for a dual-screen setup?
Yes. Two Cantilever mounts side by side handle a dual-monitor rig comfortably, each rated for its own 20 kg load and independent movement.
The EastSupplier Promise: Every order ships from vetted factory partners with full tracking, backed by a 30-day return window and responsive support. We have been moving quality goods across borders since 2010, and we stand behind every piece we sell.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.