The Thread Standard | 116-Piece Metric and SAE Tap and Die Set, HRC56

East Supplier PlatformSKU: 1005006220680191-116PCs Metric SAE-United States

Color: 116PCs Metric SAE
Prix:
$191.14

Taxes incluses Frais de port calculés au paiement

Stock:
En stock

Description

Every machine is a conversation between threads. A bolt is not held by friction but by the precise interference of two helical surfaces, and when a thread fails, whether stripped, cross-threaded or eaten by corrosion, the assembly stops behaving like a machine and becomes a pile of parts waiting for a thread that no longer exists.

This set exists for that moment. Fifty-one taps and fifty-one dies in bearing steel hardened to HRC56, machined by CNC, heat treated at 800 degrees Celsius and dual polished. The hardness is not a marketing number: a soft tap deforms under torque and cuts an oversize thread, which turns a repair into a second repair on a larger fastener. The dies are hexagonal rather than round, six flats that spread force evenly instead of concentrating it on two jaws.

The rest of the case is the difference between a set you own and a set you can work from. Tap wrenches in M3-M12 and M6-M20, die wrenches at 25.4 mm and 38 mm, SAE and metric pitch gauges, a T-type tap wrench for confined work, a screwdriver, five extractors for the thread that already gave up, and a pearl-cotton lined case that stops the taps grinding against each other in the back of a van.

A thread is a promise that two parts will hold. This set is how the promise gets kept.


What Makes It Hold

  • 51 taps and 51 dies covering metric and SAE thread families
  • Bearing steel hardened to HRC56, with a certified range of HRC55 to 62
  • CNC machined, heat treated at 800 degrees, then dual polished
  • Hexagonal dies spread load across six flats instead of two jaws
  • Taper taps start a thread cleanly, plug taps finish and repair one
  • SAE and metric pitch gauges plus five extractors in the lid
  • 6 kg kit in a shock-absorbing case measuring 47 x 6 x 31.5 cm

The Numbers

  • MaterialBearing steel
  • HardnessHRC56, certified range HRC55-62
  • Taps51
  • Dies51
  • Tap wrenchesM3-M12 and M6-M20
  • Die wrenches25.4 mm and 38 mm
  • Extractors5
  • Pitch gaugesSAE and metric
  • Case size47 x 6 x 31.5 cm / 18.5 x 2.36 x 12.4 in
  • Net weight6 kg / 13.23 lb

Where This Set Earns Its Place

This is a working set for people who repair things rather than assemble kits. A garage uses the metric range for engine and suspension fasteners and the SAE range for older American and British hardware without buying two cases. A plumber keeps the M6-M20 wrench and the plug taps for chasing damaged threads in fittings on a live system. A restorer uses the extractors when a fastener is already beyond tapping. The taper and plug pairing matters here: taper starts a thread in a fresh hole, plug cuts and cleans a full thread in a hole that already exists, and the two together cover both the build and the repair side of the same job.

Workshop Questions

Q: Are metric and SAE threads both included?

Yes. The set carries 51 taps and 51 dies spanning metric and SAE families, and includes both an SAE and a metric screw pitch gauge so a thread can be identified before anything is cut.

Q: What does HRC56 actually mean in use?

It is a Rockwell hardness figure. At HRC56 the tap resists deformation under torque, so it cuts the thread size it was ground to instead of stretching and cutting oversize, which is the common failure of cheap carbon steel sets.

Q: What is the difference between taper and plug taps?

A taper tap has a long lead-in and starts a thread in an unthreaded hole without wandering. A plug tap cuts a full-depth thread through an existing or partly formed hole, which makes it the one used for cleaning and repair.

Q: Will it cut stainless steel?

Bearing steel at this hardness will cut mild steel, aluminum, brass and copper comfortably. Stainless work hardens quickly, so you should use a proper cutting fluid and take it slowly rather than forcing the tap.

Q: Can it repair a damaged thread rather than cut a new one?

Yes. The plug taps chase an existing thread back to shape, and the five extractors remove a fastener whose head or thread has already failed.

Q: Do the dies fit a standard diestock?

The dies are hexagonal and are driven by the two included die wrenches at 25.4 mm and 38 mm. Those wrenches are the intended holder, so no separate diestock is needed.

Q: What exactly is in the case?

51 taps, 51 dies, an M3-M12 tap wrench, an M6-M20 tap wrench, a 25.4 mm die wrench, a 38 mm die wrench, a T-type tap wrench, a screwdriver, an SAE gauge, a metric gauge and five extractors.

Q: How heavy is it to carry?

The full kit is 6 kg, or 13.23 lb, in a case measuring 47 x 6 x 31.5 cm. It is a bench set that travels, not a pocket tool.

Q: Is the case worth keeping?

The case is pearl-cotton lined, which damps vibration in transit and stops the cutting edges of one tap dulling another. Keep the tools in it and the set lasts far longer than a loose drawer full of taps.

Q: Is this a professional set or a home set?

The specification is professional: hardened bearing steel, CNC machining, a certified hardness range and a full wrench complement. It is priced for a workshop that intends to use it repeatedly rather than once.

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
I
Ines Z.
Hardness is not marketing, it holds an edge

Twelve holes through 5 mm plate with the same M8 tap and it still cuts a thread you can run a bolt into by hand. My old carbon set was oval by the fourth hole. The pearl cotton case keeps them from dulling each other in the van.

H
Hamish H.
Hex dies need the wrenches that come with it

Good set, cuts cleanly in mild steel and aluminum. The hexagonal dies do not fit the round diestock I already owned, so the two die wrenches in the case are not optional. Worth knowing before you start a job on a Sunday.

G
Greta X.
Chased a stripped sump thread without dropping the pan

The M14 plug tap cleaned up a damaged drain thread in place, no swarf in the engine and no new sump. Fifty-one dies is more than I will ever use, but having metric and SAE in one case means I stopped hunting for the other set.

Payment and Security

PayPal

Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.

Estimer la livraison

You may also like

Recently Seen