Description
Speed And Quality Were Never Actually In Conflict. They only looked that way because most filament was formulated for a printer that moved at sixty millimetres per second. Push a standard PETG to six hundred and it tells you the truth immediately: inconsistent extrusion, stringing that looks like cobwebs, layer adhesion that fails under load. The problem was never the speed. It was that the polymer was never designed to flow that fast. High-speed PETG is the correction, and once a printer has run it, the old compromise stops making sense.
What changes is melt behaviour. Enhanced fluidity lets the filament liquefy and flow cleanly at rates that would starve a conventional blend, so the extruder can actually keep up with the motion system instead of dragging behind it. JAYO builds this into a matte PETG that also holds dimensional discipline: plus or minus 0.02 mm across the diameter, which is the tolerance that separates a spool you can trust to a spool you have to calibrate around. Consistent diameter means consistent line width, and consistent line width is what makes a 600 mm/s profile behave predictably at the wall rather than only in the infill.
The material itself solves a familiar problem. PETG occupies the useful middle ground between the two filaments most people start with: it prints as forgivingly as PLA, without the bed-adhesion anxiety or the brittle failure mode, and it carries the toughness and impact resistance people reach for ABS to get, without the enclosure and the fumes. The result is a spool that suits functional parts rather than only display pieces. Brackets, jigs, hinges, enclosures, replacement knobs, mountings that will be dropped and knocked and expected to survive it. The matte finish also hides layer lines better than gloss, which is why it photographs well for anything that will be sold rather than only used. Five rolls per set means a project gets finished on one batch of matched material instead of stopping halfway to chase a colour match.
A printer is only as fast as the material it is fed.
Key Features
- ✦ 600 mm/s capable: reformulated melt flow keeps extrusion consistent at speeds that stall conventional PETG.
- ✦ Plus or minus 0.02 mm tolerance: tight diameter control for steady line width and repeatable walls.
- ✦ Matte surface finish: diffuses layer lines and suppresses gloss for cleaner as-printed parts.
- ✦ PETG toughness: high impact resistance and layer adhesion suited to brackets, jigs and functional housings.
- ✦ PLA-like handling: no enclosure required and far less warping than ABS at comparable strength.
- ✦ Three temperature tiers: published settings for 50 to 100, 100 to 300 and 300 to 600 mm/s so the profile matches the speed.
- ✦ Five matched rolls: a single batch for whole projects, avoiding mid-print colour and lot changes.
Technical Specifications
- Material: PETG, high-speed matte formulation
- Diameter: 1.75 mm
- Tolerance: plus or minus 0.02 mm
- Quantity: 5 rolls per set
- Nozzle temperature: 205 to 215 C at 50 to 100 mm/s
- Nozzle temperature: 240 to 255 C at 100 to 300 mm/s
- Nozzle temperature: 255 to 270 C at 300 to 600 mm/s
- Bed temperature: 70 to 80 C
- Print speed: up to 600 mm/s
- Compatibility: suited to 99 percent of FDM printers
- Finish: Matte
- Packaging: Boxed spools, vacuum sealed
- Shelf life: 12 months sealed
Where It Earns Its Place
This is filament for people whose printer is a tool rather than a hobby. Small production shops running batches of the same part all week, where a twenty percent reduction in print time is a twenty percent reduction in the cost of every unit. Design studios printing functional prototypes that need to survive being handed to a client and dropped. Print farms running multiple machines where throughput per machine-hour is the entire business model. Makers who have moved past display models into replacement parts around the house and workshop: brackets, cable clips, drawer runners, hinge shims, jigs for the drill press. It also suits anyone selling printed goods, because the matte finish photographs cleanly, hides layer artefacts and reads as a finished product rather than a print. Five rolls is deliberately a project quantity, sized so a run of twenty parts happens on one batch of matched material instead of stalling halfway through on a colour that no longer matches.
Frequently Asked Questions
Q: Will this actually print at 600 mm/s on my machine?
A: The filament supports it, but the printer has to as well. You need a high-flow hotend, a direct drive or a well tuned Bowden path, and input shaping or pressure advance configured. On a stock printer running at 60 to 100 mm/s, the material works perfectly well at the lower temperature tier; the high-speed capability simply means the filament is not the bottleneck if you upgrade.
Q: Why does the temperature change with print speed?
A: Faster movement means the melt zone spends less time in contact with the heater and the extruded bead cools differently. Running 205 to 215 C at 600 mm/s would produce poor layer adhesion because the polymer cannot fuse. The published tiers, up to 255 to 270 C at the highest speeds, exist so that the nozzle temperature matches the actual flow rate.
Q: How is this different from standard PETG?
A: The base polymer is the same family, but the formulation is tuned for melt flow and finished matte rather than gloss. In practice that means it extrudes reliably at rates that make standard PETG string and under-extrude, and it hides layer lines better. Strength, chemical resistance and bed temperature are broadly comparable.
Q: Does it need drying before use?
A: It is vacuum sealed, so the first print from a fresh spool should be fine. PETG is mildly hygroscopic, so a spool left open in humid air for weeks will start to pop and string. Store it sealed with desiccant, and dry it at 65 C for four to six hours if it has been exposed.
Q: What bed surface works best?
A: A textured PEI sheet at 70 to 80 C gives reliable first-layer adhesion and releases cleanly once cool. PETG bonds very aggressively to smooth glass and bare PEI, so use a release agent or a textured plate rather than printing directly onto a smooth surface you care about.
Q: Is it food safe or suitable for outdoor parts?
A: Treat it as neither by default. PETG handles UV and moisture better than PLA, which makes it reasonable for sheltered outdoor brackets, but it is not UV-stabilised for permanent sun exposure. For food contact, printed parts have layer-line porosity regardless of material, so they are not considered food safe without a coating.
Customer Reviews
Payment and Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.