Description
Bathroom lighting fails people in a specific way. It puts a single bulb above the head and leaves the face in its own shadow, then hands you a mirror that reflects the shadow back with extra honesty. The Halo Vanity fixes the geometry by placing the light source in the mirror itself, lit from the front and from behind the glass, so the face is evenly lit rather than judged by the ceiling.
The glass is a five millimetre copper free silver mirror with an aluminium frame and a mirror CRI above 95 percent, which means the colour you see in it is close to the colour other people see. Touch controls cycle three colour temperatures at 3500, 4500 and 6500 Kelvin and dim the output from bright to soft for early mornings and late evenings. A heated defog zone clears steam after a shower, and the weather protection is rated to IP65, so the unit survives the splash zone it spends its life in. Power draw is 36 watts on US, UK, JP and EU variants and 45 watts on the Australian variant, fed by a 100 to 277 volt input with a 12 volt output.
Installation is a wall mount with the screw accessory set included, and professional wiring is advised if you want the mirror switched from a wall plate. The circular format works with sizes from 40 to 180 centimetres across the full range, and the mirror can be specified in round or rectangular proportions depending on the vanity. Warranty runs up to five years on the LED driver and mirror assembly.
You will look into this every morning for the next decade. It is worth the fifteen minutes of planning.
Key Features
- ✦ Front lit and back lit LED illumination in a single round mirror
- ✦ Three colour temperatures at 3500K, 4500K and 6500K with touch dimming
- ✦ Heated anti fog zone clears condensation after a shower
- ✦ Mirror CRI above 95 percent for accurate skin tone and colour
- ✦ 5 mm copper free eco friendly silver glass in an aluminium frame
- ✦ IP65 rated against water, suitable for the direct splash zone
- ✦ 5 year warranty with wall mount screw accessories included
Technical Specifications
- Model: XMR-Y28-618, LUVODI
- Mirror Shape: Round, frameless appearance
- Mirror Material: 5 mm copper free eco friendly silver glass with aluminium frame
- Lighting: LED strip, front lit plus backlit, CRI above 95 percent
- Colour Temperature: 3500K warm, 4500K neutral, 6500K daylight
- Control: Smart touch screen with stepless dimming and anti fog function
- Waterproof Rating: IP44 to IP65 depending on installation
- Power: 36W (US, UK, JP, EU), 45W (AUS), input 100 to 277V, output 12V
- Operating Temperature: minus 30 to 75 degrees Celsius
- Warranty: 5 years with CE, RoHS, FCC, SAA and UKCA certification
Where It Fits
It suits the bathroom being renovated rather than repaired, where the vanity lighting genuinely matters for makeup application, shaving or skincare at close range. Hotels and short stay properties specify it because the anti fog function and even lighting read as a higher tier of fit out. Round mirrors also work in powder rooms and small ensuites where a rectangular mirror would crowd the wall, and the 60 centimetre size covers a single basin comfortably.
Frequently Asked Questions
Q: How is the mirror powered?
A: It runs from mains input at 100 to 277 volts and uses an internal driver with a 12 volt output. A wall switch can control it, and the installation notes recommend a qualified electrician for that wiring because the unit needs a permanent live connection.
Q: Does the anti fog function work continuously?
A: The defog pad heats the glass to clear condensation after a shower. It is switched by the touch control rather than running permanently, which keeps power use low when the bathroom is not in use.
Q: Can the light colour be changed?
A: Yes. Touching the control cycles through 3500K warm, 4500K neutral and 6500K daylight, and the same control dims the output. Warm light suits evening routines, while 6500K is the setting for accurate makeup and detail work.
Q: Is the mirror safe in a wet zone?
A: The unit is rated IP44 to IP65 depending on installation and is built for bathroom conditions. Mounting it clear of direct water spray from a shower head extends its service life, even where a higher rating would technically permit it.
Q: What size should I choose for a single basin?
A: A 60 centimetre round mirror sits comfortably over one basin, with 70 to 80 centimetre versions for wider vanities. The full size range in this line runs from 40 to 180 centimetres, so measure the wall and the basin centre line before ordering.
Q: Is a mounting kit included?
A: Yes. The package includes the mirror, a screw accessory set and installation instructions. The mirror is frameless with an aluminium backing, so the fixings pass through the rear frame directly into wall anchors.







Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
