{"product_id":"the-matte-standard-pla-matte-filament","title":"The Matte Standard | SUNLU PLA Matte Filament, 1.75 mm 1 kg","description":"\u003cdiv class=\"product-narrative\"\u003e\n\u003cp\u003eA print is finished long before it leaves the plate. What ruins it afterwards is light, because every glossy filament turns each layer into a highlight, and a hundred highlights read as visible layer lines from any angle. PLA Matte removes that reflection at the source. The surface stays flat and light-absorbing, so the geometry of the part is what the eye sees, not the staircase of the extrusion.\u003c\/p\u003e\n\u003cp\u003eThat finish only holds if the filament feeds consistently. SUNLU winds this spool at a fixed tension with no crossed loops, so the pull stays even from the first metre to the last, and the dimensional tolerance is held to plus or minus 0.02 mm across the 1.75 mm diameter. In practice that means no mid-print diameter drift, no sudden under-extrusion band at hour six, and a first layer that behaves the same on the tenth print as it did on the first. Low shrinkage and near-zero warping keep long flat parts on the bed without a raft.\u003c\/p\u003e\n\u003cp\u003eIt prints odourless on a standard FDM machine and suits the full range of common hotends and direct-drive extruders, so a spool does not commit you to one printer. The 1 kg spool gives roughly 330 metres of 1.75 mm filament, enough for a batch of display models or a single large structural piece, and the matte surface takes primer and acrylic without the keying problems that satin PLA creates.\u003c\/p\u003e\n\u003cp\u003e\u003cem style=\"color:#444;\"\u003eLayer lines are inevitable. Making them reflect light is a choice, and this is the spool that declines it.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003chr style=\"margin:30px 0;border:0;border-top:1px solid #e6e6e6;\"\u003e\n\u003cdiv class=\"product-detail\"\u003e\n\u003ch3\u003eWhy the finish is the specification\u003c\/h3\u003e\n\u003cul style=\"list-style:none;padding:0;margin:0;\"\u003e\n\u003cli style=\"padding:11px 0;border-bottom:1px solid #f0f0f0;line-height:1.75;\"\u003e\n\u003cstrong style=\"color:#111;\"\u003e✦ \u003c\/strong\u003eMatte finish that absorbs light instead of reflecting it, so layer lines stay invisible in photographs and on a desk.\u003c\/li\u003e\n\u003cli style=\"padding:11px 0;border-bottom:1px solid #f0f0f0;line-height:1.75;\"\u003e\n\u003cstrong style=\"color:#111;\"\u003e✦ \u003c\/strong\u003eDimensional accuracy held to plus or minus 0.02 mm on a 1.75 mm diameter, checked across the spool rather than at one point.\u003c\/li\u003e\n\u003cli style=\"padding:11px 0;border-bottom:1px solid #f0f0f0;line-height:1.75;\"\u003e\n\u003cstrong style=\"color:#111;\"\u003e✦ \u003c\/strong\u003e100 percent neatly wound, fixed-tension spooling with no crossed loops, which is what prevents mid-print snags.\u003c\/li\u003e\n\u003cli style=\"padding:11px 0;border-bottom:1px solid #f0f0f0;line-height:1.75;\"\u003e\n\u003cstrong style=\"color:#111;\"\u003e✦ \u003c\/strong\u003eLow shrinkage and near-zero warping: long flat parts hold the bed without a brim or raft.\u003c\/li\u003e\n\u003cli style=\"padding:11px 0;border-bottom:1px solid #f0f0f0;line-height:1.75;\"\u003e\n\u003cstrong style=\"color:#111;\"\u003e✦ \u003c\/strong\u003eOdourless during printing, suitable for a workshop, an office or a classroom where an enclosed printer is not an option.\u003c\/li\u003e\n\u003cli style=\"padding:11px 0;border-bottom:1px solid #f0f0f0;line-height:1.75;\"\u003e\n\u003cstrong style=\"color:#111;\"\u003e✦ \u003c\/strong\u003eWorks with the common FDM range, so one spool is not locked to a single machine or hotend.\u003c\/li\u003e\n\u003cli style=\"padding:11px 0;border-bottom:1px solid #f0f0f0;line-height:1.75;\"\u003e\n\u003cstrong style=\"color:#111;\"\u003e✦ \u003c\/strong\u003eMatte surface takes primer, acrylic and filler without the keying problems of satin PLA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-specs\"\u003e\n\u003ch3\u003eSpool data and starting settings\u003c\/h3\u003e\n\u003cul style=\"list-style:none;padding:0;margin:0;\"\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;font-size:15px;line-height:1.65;\"\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e PLA Matte\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;font-size:15px;line-height:1.65;\"\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 1.75 mm, tolerance plus or minus 0.02 mm\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;font-size:15px;line-height:1.65;\"\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 1 kg \/ 2.2 lb spool\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;font-size:15px;line-height:1.65;\"\u003e\n\u003cstrong\u003eApproximate length:\u003c\/strong\u003e 330 m at 1.75 mm\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;font-size:15px;line-height:1.65;\"\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Matte, low reflectivity\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;font-size:15px;line-height:1.65;\"\u003e\n\u003cstrong\u003eNozzle temperature:\u003c\/strong\u003e 200 to 220 C, start at 210 C\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;font-size:15px;line-height:1.65;\"\u003e\n\u003cstrong\u003eBed temperature:\u003c\/strong\u003e 50 to 60 C, or unheated with glue stick\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;font-size:15px;line-height:1.65;\"\u003e\n\u003cstrong\u003ePrint speed:\u003c\/strong\u003e 40 to 80 mm\/s\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;font-size:15px;line-height:1.65;\"\u003e\n\u003cstrong\u003eShrinkage:\u003c\/strong\u003e Low, minimal warping\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;font-size:15px;line-height:1.65;\"\u003e\n\u003cstrong\u003eOdour:\u003c\/strong\u003e None in normal printing\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;font-size:15px;line-height:1.65;\"\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Sealed with desiccant, 12 month shelf life\u003c\/li\u003e\n\u003cli style=\"padding:9px 0;border-bottom:1px solid #f0f0f0;font-size:15px;line-height:1.65;\"\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Standard FDM printers, 1.75 mm hotends\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-applications\"\u003e\n\u003ch3\u003eWhat this spool is for\u003c\/h3\u003e\n\u003cp style=\"line-height:1.85;\"\u003eThis is the spool for work that gets photographed: display models, architectural massing, product prototypes, prop pieces, tabletop terrain that will be seen at close range on a shelf. It is equally the right choice for functional parts where the surface should not look printed at all, such as bracket covers, jigs and enclosures that sit in a workshop. Because it prints without odour, it is also the sensible default for a classroom or a shared office where an enclosed printer is not available.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-faq\"\u003e\n\u003ch3\u003ePractical questions before you print\u003c\/h3\u003e\n\u003cdiv style=\"margin-bottom:18px;\"\u003e\n\u003cp style=\"margin:0 0 6px;\"\u003e\u003cstrong\u003eQ: Does matte PLA print differently from standard PLA?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.8;\"\u003eIt runs marginally hotter and slower. Start at 210 C nozzle and 55 C bed with the part cooling fan at full after the first three layers. If you see weak layer adhesion, drop to 40 mm\/s before raising temperature further.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin-bottom:18px;\"\u003e\n\u003cp style=\"margin:0 0 6px;\"\u003e\u003cstrong\u003eQ: Will the matte finish hide layer lines completely?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.8;\"\u003eIt removes the specular highlight that makes layer lines visible, which is most of the effect. Faint stepping can still be caught in raking light. Lower layer height and a 0.4 mm nozzle give the cleanest result.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin-bottom:18px;\"\u003e\n\u003cp style=\"margin:0 0 6px;\"\u003e\u003cstrong\u003eQ: Is it brittle?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.8;\"\u003eIt behaves like standard PLA: rigid and dimensionally stable, not impact resistant. For parts that flex or take a knock, use PETG or ABS. For display and light-load functional parts, the rigidity is an advantage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin-bottom:18px;\"\u003e\n\u003cp style=\"margin:0 0 6px;\"\u003e\u003cstrong\u003eQ: How should the spool be stored between prints?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.8;\"\u003eSealed with the supplied desiccant, away from sunlight. PLA absorbs moisture slowly, but a spool left open for months will string and pop. If it does, dry it at 45 C for four to six hours before printing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin-bottom:18px;\"\u003e\n\u003cp style=\"margin:0 0 6px;\"\u003e\u003cstrong\u003eQ: Does it need an enclosure?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.8;\"\u003eNo. Low shrinkage means it prints on an open machine without draughts causing warping. An enclosure helps in a cold workshop but is not required.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"margin-bottom:18px;\"\u003e\n\u003cp style=\"margin:0 0 6px;\"\u003e\u003cstrong\u003eQ: How much can one spool produce?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin:0;line-height:1.8;\"\u003eRoughly 330 metres, which is about 350 average-sized display models or one large structural print. The slicer estimate in grams is the reliable guide, since 1 kg of PLA is close to 1 kg of printed part plus supports.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-gallery\" style=\"margin-top:36px;text-align:center;\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/S7bcff6e999df48da8fe459fef947519cA.webp?v=1792565576\" alt=\"The Matte Standard | SUNLU PLA Matte Filament, 1.75 mm 1 kg\" style=\"max-width:100%;height:auto;margin:0 0 14px;border-radius:4px;\" loading=\"lazy\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/S055c6e5f7d2540c2ba357b010b409a5dk.webp?v=1792565575\" alt=\"The Matte Standard | SUNLU PLA Matte Filament, 1.75 mm 1 kg\" style=\"max-width:100%;height:auto;margin:0 0 14px;border-radius:4px;\" loading=\"lazy\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/S35a00f8185424c469fe16ad94c894d47I.webp?v=1792565575\" alt=\"The Matte Standard | SUNLU PLA Matte Filament, 1.75 mm 1 kg\" style=\"max-width:100%;height:auto;margin:0 0 14px;border-radius:4px;\" loading=\"lazy\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/Sc1084133c67a46ae99e3164d5eb571a66.webp?v=1792565576\" alt=\"The Matte Standard | SUNLU PLA Matte Filament, 1.75 mm 1 kg\" style=\"max-width:100%;height:auto;margin:0 0 14px;border-radius:4px;\" loading=\"lazy\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/S73a5f453bae545e488ce14fdf73253f0x.webp?v=1792565576\" alt=\"The Matte Standard | SUNLU PLA Matte Filament, 1.75 mm 1 kg\" style=\"max-width:100%;height:auto;margin:0 0 14px;border-radius:4px;\" loading=\"lazy\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/S4900dc76ba3847369c06e192e75c4160c_977097ab-ea61-474d-af0e-5e1b85cbbac7.webp?v=1792565575\" alt=\"The Matte Standard | SUNLU PLA Matte Filament, 1.75 mm 1 kg\" style=\"max-width:100%;height:auto;margin:0 0 14px;border-radius:4px;\" loading=\"lazy\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/S897c5474cc644d5d8ae3352594521b14v.webp?v=1792565578\" alt=\"The Matte Standard | SUNLU PLA Matte Filament, 1.75 mm 1 kg\" style=\"max-width:100%;height:auto;margin:0 0 14px;border-radius:4px;\" loading=\"lazy\"\u003e\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/S72924605a39244828cf455b23a5b0049C.webp?v=1792565576\" alt=\"The Matte Standard | SUNLU PLA Matte Filament, 1.75 mm 1 kg\" style=\"max-width:100%;height:auto;margin:0 0 14px;border-radius:4px;\" loading=\"lazy\"\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"Product\", \"name\": \"The Matte Standard | SUNLU PLA Matte Filament, 1.75 mm 1 kg\", \"description\": \"A print is finished long before it leaves the plate. What ruins it afterwards is light, because every glossy filament turns each layer into a highlight, and a hundred highlights read as visible layer lines from any angle. PLA Matte removes that reflection at the source. The surfa\", \"sku\": \"SUN-PLAMATTE-1KG\", \"brand\": {\"@type\": \"Brand\", \"name\": \"SUNLU\"}, \"url\": \"https:\/\/eastsupplier.com\/products\/the-matte-standard-pla-matte-filament\", \"image\": [\"https:\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/S7bcff6e999df48da8fe459fef947519cA.webp?v=1792565576\"], \"offers\": {\"@type\": \"AggregateOffer\", \"priceCurrency\": \"USD\", \"lowPrice\": \"26.12\", \"highPrice\": \"34.12\", \"offerCount\": 12, \"availability\": \"https:\/\/schema.org\/InStock\", \"url\": \"https:\/\/eastsupplier.com\/products\/the-matte-standard-pla-matte-filament\"}, \"aggregateRating\": {\"@type\": \"AggregateRating\", \"ratingValue\": \"4.7\", \"reviewCount\": 3}}\u003c\/script\u003e","brand":"EastSupplier Platform","offers":[{"title":"Olive Green \/ United States","offer_id":68210683740383,"sku":"1005008835333032-Olive Green-United States","price":40.26,"currency_code":"USD","in_stock":true},{"title":"tender green shoots \/ United States","offer_id":68210683904223,"sku":"1005008835333032-tender green shoots-United States","price":40.26,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ Germany","offer_id":68210684100831,"sku":"1005008835333032-Yellow-Germany","price":30.82,"currency_code":"USD","in_stock":true},{"title":"Yellow \/ Australia","offer_id":68210684199135,"sku":"1005008835333032-Yellow-Australia","price":30.82,"currency_code":"USD","in_stock":true},{"title":"Purple \/ Germany","offer_id":68210684461279,"sku":"1005008835333032-Purple-Germany","price":30.82,"currency_code":"USD","in_stock":true},{"title":"Sea Salt Blue \/ Germany","offer_id":68210684920031,"sku":"1005008835333032-Sea Salt Blue-Germany","price":30.82,"currency_code":"USD","in_stock":true},{"title":"Sea Salt Blue \/ United States","offer_id":68210685116639,"sku":"1005008835333032-Sea Salt Blue-United States","price":40.26,"currency_code":"USD","in_stock":true},{"title":"Clay \/ United States","offer_id":68210685280479,"sku":"1005008835333032-Clay-United States","price":40.26,"currency_code":"USD","in_stock":true},{"title":"tender green shoots \/ Germany","offer_id":68210685378783,"sku":"1005008835333032-tender green shoots-Germany","price":30.82,"currency_code":"USD","in_stock":true},{"title":"Blue \/ Germany","offer_id":68210685542623,"sku":"1005008835333032-Blue-Germany","price":30.82,"currency_code":"USD","in_stock":true},{"title":"Red \/ United States","offer_id":68210685804767,"sku":"1005008835333032-Red-United States","price":40.26,"currency_code":"USD","in_stock":true},{"title":"Lavender Purple \/ Australia","offer_id":68210686034143,"sku":"1005008835333032-Lavender Purple-Australia","price":30.82,"currency_code":"USD","in_stock":true},{"title":"Green \/ United Kingdom","offer_id":68210686132447,"sku":"1005008835333032-Green-United Kingdom","price":30.82,"currency_code":"USD","in_stock":true},{"title":"Green \/ Germany","offer_id":68210686263519,"sku":"1005008835333032-Green-Germany","price":30.82,"currency_code":"USD","in_stock":true},{"title":"Blue \/ United States","offer_id":68210686525663,"sku":"1005008835333032-Blue-United States","price":40.26,"currency_code":"USD","in_stock":true},{"title":"Orange \/ Germany","offer_id":68210686656735,"sku":"1005008835333032-Orange-Germany","price":30.82,"currency_code":"USD","in_stock":true},{"title":"Green \/ United States","offer_id":68210686918879,"sku":"1005008835333032-Green-United States","price":40.26,"currency_code":"USD","in_stock":true},{"title":"Oak \/ Australia","offer_id":68210687148255,"sku":"1005008835333032-Oak-Australia","price":30.82,"currency_code":"USD","in_stock":true},{"title":"Pink \/ Germany","offer_id":68210687377631,"sku":"1005008835333032-Pink-Germany","price":30.82,"currency_code":"USD","in_stock":true},{"title":"Black \/ United States","offer_id":68210687672543,"sku":"1005008835333032-Black-United States","price":40.26,"currency_code":"USD","in_stock":true},{"title":"Black \/ Germany","offer_id":68210687705311,"sku":"1005008835333032-Black-Germany","price":30.82,"currency_code":"USD","in_stock":true},{"title":"White \/ United States","offer_id":68210687869151,"sku":"1005008835333032-White-United States","price":40.26,"currency_code":"USD","in_stock":true},{"title":"Red \/ Germany","offer_id":68210688098527,"sku":"1005008835333032-Red-Germany","price":30.82,"currency_code":"USD","in_stock":true},{"title":"Grey \/ United States","offer_id":68210688229599,"sku":"1005008835333032-Grey-United States","price":40.26,"currency_code":"USD","in_stock":true},{"title":"Grey \/ Germany","offer_id":68210688262367,"sku":"1005008835333032-Grey-Germany","price":30.82,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0503\/6412\/1244\/files\/S7bcff6e999df48da8fe459fef947519cA.webp?v=1792565576","url":"https:\/\/eastsupplier.com\/en-kr\/products\/the-matte-standard-pla-matte-filament","provider":"EastSupplier Platform","version":"1.0","type":"link"}