Description
A level line is only useful if the person holding the pencil can see it across a room in daylight. That single constraint explains why green diodes replaced red ones on site: at 535 nanometres the beam reads brighter to the human eye at the same power, which means a line that survives a window full of afternoon sun and a wall four metres away.
The Level Field projects sixteen lines from one housing, one horizontal plane at full 360 degrees and vertical planes that intersect it at right angles. Set it on a tripod or a shelf, let the pendulum settle, and the reference lines appear on all four walls at once. Floor to ceiling, corner to corner, the square is established without a chalk line and without a second person holding a tape.
Accuracy is stated at plus or minus 2.5 mm over 5 metres, which is the tolerance tiling, suspended ceilings and cabinet runs actually work to. The housing is compact at 130 by 190 mm, so it fits in a tool bag rather than a case of its own, and the green beam stays sharp across the working distance instead of blooming into a fat stripe.
Precision on site is not a matter of care. It is a matter of having a reference you can trust at a glance.
What sixteen lines means in practice
- ✦ Sixteen lines across one horizontal plane and two vertical planes
- ✦ Full 360 degree horizontal coverage, so one setup squares a whole room
- ✦ 535 nm green diode, visibly brighter than red at the same output
- ✦ Self-levelling pendulum with a transport lock for the van
- ✦ Stated accuracy of plus or minus 2.5 mm over 5 m
- ✦ Compact 130 x 190 mm housing that fits a standard tool bag
- ✦ EU plug supply, CE marked for European site use
Beam data
- Type: 4D self-levelling cross-line laser
- Line count: 16
- Wavelength: 535 nm green
- Projection: 360 degree horizontal plus vertical planes with intersections
- Accuracy: plus or minus 2.5 mm per 5 m
- Housing size: 130 x 190 mm
- Levelling: automatic pendulum, lockable for transport
- Plug: EU
- Certification: CE
- Application: interior layout, tiling, ceilings, cabinet and partition setting out
The trades that use it
Tilers buy it because a 360 degree horizontal line means the first course sets the datum for every wall in the room without moving the tool. Suspended ceiling installers use the vertical planes to strike the perimeter grid and the horizontal plane to set hanger heights in the same setup. Cabinet makers run it along a wall to establish a counter height that stays true over six metres, which a spirit level cannot do. Electricians and plumbers use the vertical lines to mark runs down a wall and keep back boxes aligned across a floor. It also suits the serious DIY buyer fitting a kitchen once, where the tool costs less than paying a fitter to correct a wall of crooked units.
Field questions
Q: Can I see the lines outdoors?
A: Green lines are far easier to read in daylight than red, but direct sun on the target surface still washes them out. For outdoor work, use a detector or plan the layout for early morning and late afternoon.
Q: What does 4D mean?
A: Four planes of reference: one horizontal at full 360 degrees and two vertical planes that intersect it at right angles, all projected from the same housing. That is what produces sixteen lines in total.
Q: Does it need calibrating?
A: The pendulum is factory set. Check it occasionally against a known level over a long run. If it falls outside the stated tolerance after a drop, it needs professional recalibration rather than a setting adjustment.
Q: Is the transport lock important?
A: Yes. Engage the lock before moving it, or the pendulum swings against its stops in the van and the accuracy suffers. The lock also prevents the unit trying to self-level on a rough surface.
Q: Can it be mounted on a tripod?
A: The housing is designed to sit on a flat surface or a standard levelling stand, and it is compact enough to place on a shelf or a stack of boards when a tripod is not available.
Q: What supply does it use?
A: The unit ships with an EU plug supply. On other supplies, use a matching adapter rated for continuous use rather than a travel converter.
Q: How far does the line reach?
A: Working distance depends on ambient light and surface. Indoors, the horizontal line is readable across a normal room and down a corridor. Past that, a line detector extends the usable range considerably.
Q: Will it work on an uneven floor?
A: Self-levelling compensates for small slopes only. On a significant incline the unit reaches its limit and warns rather than projecting a false line. Set it on the flattest point available.





Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
