Description
Solder work is decided at a scale the eye cannot resolve. A joint that looks sound at arm's length can be a cold fillet with a hairline crack, and the only way to know is to see it larger than life without putting your face inside the work.
This is a bench inspection system rather than a microscope in the laboratory sense. A 48 megapixel sensor feeds a 4K HDMI output, so the image appears on a monitor at working distance, with both hands free and no eyepiece to squint into. For rework on fine-pitch boards, that arrangement changes the job: the iron goes where you look, not where you guess.
The optics are monocular with a variable magnification range and a working distance that leaves room for a soldering iron and a pair of tweezers. Output is not limited to HDMI: VGA and USB are present, so the same camera can feed a bench monitor, a capture card for documentation, or a projector for training. Recording is the feature teams underuse until the first time a customer disputes a rework.
Illumination is where budget inspection systems fail. A ring light with adjustable intensity and a diffuser produces even light across a reflective PCB, which is the difference between seeing a solder fillet and seeing a white rectangle where a solder fillet should be.
The eye guesses at 0.2 mm. The sensor does not.
What Makes It Different
- ✦48 megapixel sensor with 4K HDMI output for full-size bench viewing.
- ✦48MP / 13MP effective pixel modes depending on configuration.
- ✦Variable magnification with working distance that leaves room for tools.
- ✦HDMI, VGA and USB outputs for monitors, capture and training setups.
- ✦Adjustable ring illumination with diffusion for reflective boards.
- ✦Both hands free: no eyepiece, no neck strain over a bench.
- ✦Suits PCB inspection, solder rework, watchmaking, engraving and forensics.
Technical Specifications
- Sensor48MP CMOS, 13MP effective in some modes
- Output4K HDMI, VGA, USB
- DrawtubeMonocular, variable magnification
- Working distanceSet for rework access with tools in frame
- IlluminationAdjustable ring light with diffuser
- MountingBench stand, adjustable height and focus
- Smart featuresOnboard capture and measurement functions
- CertificationCE, FCC
- BatteryNot required, mains powered
- UsePCB inspection, soldering, watch repair, engraving, documentation
Where It Earns Its Place
The buyer is a repair bench that has been doing fine work under a magnifier and a desk lamp. An electronics shop uses it for BGA inspection and fine-pitch rework, where the monitor is the difference between a joint and a reflow. A watchmaker wants the working distance and the ring light, since both hands are on the movement. A school or training centre plugs the HDMI into a projector and turns one bench into a classroom. A quality inspector uses the capture function to keep a photographic record of incoming boards, which is the cheapest insurance against a supplier dispute.
The EastSupplier Promise
Sourced directly from vetted manufacturing partners, inspected before dispatch, and priced without distributor layers. If the item arrives outside specification, we replace it or refund it. Every listing on this store is curated by a human buyer, not bulk-imported and abandoned.
Questions Buyers Actually Ask
Q: Do I need a computer?
No. It outputs directly to a monitor over HDMI. A computer is only needed if you want to record or stream through USB.
Q: What magnification does it achieve?
Magnification depends on the lens and the monitor size. The practical way to evaluate it is working distance and how much of a board fills the screen, not a single number.
Q: Can I record video?
Yes, through the onboard capture functions or via the USB output to a computer.
Q: Is it good for soldering?
It is built for it: the working distance leaves room for an iron and tweezers, and the ring light keeps the joint visible while you work.
Q: Can it inspect through a microscope slide or cover glass?
The optics are configured for reflective bench work. Transmitted-light specimens need a different stage and illumination path.
Q: What monitor should I use?
A 4K monitor at 27 inches or larger gives the most usable image. A 1080p monitor works, but you are paying for resolution the display cannot show.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.