Description
Light Is the First Material of a Room. Everything Else Is Placed Inside It. Before paint, before furniture, before the art on the wall, a room is shaped by where the light falls and where it does not. A ceiling that glows evenly makes a small kitchen feel considered and a bathroom feel like a hotel; a ceiling with one weak bulb in the middle makes the same room feel unfinished no matter what you put in it.
The Ceiling Halo is a recessed downlight set that retrofits that problem in an afternoon. Each unit is built on an aluminium body that dissipates heat instead of trapping it, so the diodes hold their output for years rather than dimming after a season. The colour rendering index sits above 80, which is the technical way of saying skin tones, wood grain and food look the way they are supposed to look rather than grey and flat. Six or twelve units ship together, sized for a run of ceiling or a whole floor.
Switchable colour temperature is the practical detail. The three-colour version toggles between cold white for task areas, warm white for living spaces and a natural white in between, using the existing wall switch rather than a dimmer you have to install. Choose the 110V set for North America and Japan or the 220V set for the rest of the world. With five watt, nine watt, twelve and fifteen watt options and cut-out sizes from 2 to 3.5 inches, one order covers a hallway and a bathroom alike.
A ceiling is not a surface. It is the source of everything you will see in the room.
Key Features
- ✦ Aluminium heat-dissipating body that keeps output stable instead of fading.
- ✦ Three-colour switchable between cold white, warm white and natural white.
- ✦ CRI above 80 for accurate colour on skin, timber and food.
- ✦ 6 or 12 piece sets sized for a single run or a whole floor.
- ✦ 5W to 15W output with 110V and 220V variants for every region.
- ✦ Recessed low profile that sits flush with the ceiling plane.
Technical Specifications
- Material: Aluminium
- Power Options: 5W, 9W, 12W, 15W
- Voltage: AC 85-175V (110V regions) or AC 176-264V (220V regions)
- Colour Temperature: Cold white, warm white or 3-colour switchable
- Colour Rendering Index: Ra greater than 80
- Cut-Out Sizes: 2 inch to 3.5 inch depending on wattage and type
- Set Size: 6 or 12 pieces per pack
- Certification: CE, RoHS, UL, VDE, SAA, GS, FCC, EMC, LVD
- Warranty: 3 years
- Application: Bathroom, kitchen, hallway, retail display
Where It Works
Ideal for a renovation where the ceiling is already open or the old fittings are due to fail: a run of four downlights over a kitchen island, a grid across a bathroom where moisture demands a recessed fitting, a row down a hallway that currently relies on one dim pendant. Contractors use the 12-piece set to light a whole apartment in one order, while a homeowner replacing two tired halogens simply buys the six-piece and keeps the spares for the next room.
Frequently Asked Questions
Q: How do I choose between 110V and 220V?
A: North America, Canada, Mexico and Japan use the 110V variant; most of Europe, Asia, Australia and Africa use 220V. Match the voltage to your region before ordering, since the fittings are not interchangeable.
Q: Does the three-colour version dim the brightness?
A: It switches colour temperature between cold white, warm white and natural white. It adjusts the tone rather than the brightness level, so use wattage to set the output you need.
Q: What size hole do I need in the ceiling?
A: Cut-out size depends on wattage and fitting type, from roughly 2 inches for the smallest 5W unit up to 3.5 inches for the 12W and 15W models. Check the specification for your chosen variant before cutting.
Q: Are they safe in a bathroom?
A: Yes. The recessed aluminium body and low-profile design are suited to bathroom installations. Ensure the circuit is isolated before fitting and follow local wiring regulations.
Q: How long do the LEDs last?
A: The aluminium heat sink is the reason these run for years rather than months. Dissipating heat properly is what protects the diodes, and the unit carries a three year warranty.
Q: Can I mix wattages in one ceiling?
A: Yes, provided you keep the voltage and colour type consistent. Many installs use higher wattage over task areas and lower wattage in circulation space.
Why Aluminium Matters
Cheap downlights are built on plastic housings that trap heat around the driver, and heat is what kills an LED long before its rated hours are up. An aluminium body conducts that heat away from the electronics and out through the ceiling, which is the unseen reason a well-specified fitting still looks the same in year three. It is a small engineering choice that decides whether you replace a ceiling once or twice.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.