Description
A television that turns on, shows a faint image, then goes black is usually not a dead panel. It is a dead backlight. The LCD is still working, the mainboard is still working, and the one component that failed costs a fraction of a replacement set. What stops most people is not the repair, it is identifying which of forty near-identical strip variants fits their chassis.
This set is the answer for the Philips 65PUS family that uses the LB65047 strip: models including the 65PUS6523, 65PUS6162/12, 65PUS6262, 65PUS6412 and the 65PUS variants sharing the same light bar. Each set carries fourteen pieces covering the full R and L arrangement at twelve LEDs per bar, thirteen hundred and thirty two millimetres long, running on the three volt nominal rail with a five volt DC input. The reference numbers to match against the strip in your set are 4D7850000EA0, 4D7850010EA0 and E466169.
The bars are aluminum-backed rather than flexible film, which matters for two reasons. Aluminum spreads heat along the bar instead of concentrating it at the LED, and it holds its shape when the diffuser stack is pressed back over it. A kit that flexes will look correct on the bench and show as uneven brightness across the panel six months later. Rated life on this strip is one hundred thousand hours, which for a domestic set is longer than the rest of the television will remain current.
Every strip is tested before it ships, and the kit is sold as a complete set rather than individually, because replacing one failed bar in a series string is how a second repair gets scheduled. If two LEDs have failed, the driver has already been running outside its design window and the remaining bars have taken the same stress. Replacing the set once is the economical decision, and it is why repair shops order this kit whole.
The panel was fine. Replace the light behind it and stop shopping for televisions.
What the kit covers
- ✦ 14-piece complete set with the R and L arrangement - replace the whole string, not one failed bar in a stressed series.
- ✦ LB65047 compatibility covering 65PUS6523, 65PUS6162/12, 65PUS6262, 65PUS6412 and matching 65PUS chassis.
- ✦ Reference numbers printed for verification: 4D7850000EA0, 4D7850010EA0 and E466169 - match before you buy.
- ✦ Aluminum-backed bars that spread heat along the length instead of concentrating it at each LED.
- ✦ 1332 mm bar length with 12 LEDs per bar at the 3 V nominal rail.
- ✦ 100,000 hour rated life - longer than a domestic set stays current.
- ✦ Tested before dispatch, sold as a matched set for a single repair.
Technical Specifications
- Kit contents 14 pieces per set (R + L arrangement)
- Compatible models Philips 65PUS6523, 65PUS6162/12, 65PUS6262, 65PUS6412 and matching 65PUS chassis
- Strip model LB65047 V0_01 / V1_01
- Reference codes 4D7850000EA0, 4D7850010EA0, E466169
- LED configuration 12 LEDs per bar, 3 V nominal
- Bar length 1332 mm
- Input 5 V DC
- Material Aluminum-backed strip
- Rated life 100,000 hours
- Certification CE
- Waterproof No - internal chassis component
Who buys backlight kits
Independent television repair shops working through insurance and warranty overflow, refurbishers preparing sets for resale, and owners of a five to seven year old 65 inch set who have already been quoted more for a panel than the television cost. The economics are simple: a strip kit and an afternoon versus a new television, and the rest of the set has years left in it.
Questions repairers ask before ordering strips
Q. How do I confirm this fits my television?
Open the back cover and read the part number printed on the existing light bar. If it reads LB65047, or matches 4D7850000EA0 / 4D7850010EA0 / E466169, this is the set. Model numbers on the rear label alone are not enough, because Philips used more than one strip across the same 65PUS series.
Q. Do I need to replace all fourteen bars?
If one bar has failed, the rest have been driven by the same circuit and are the same age. Replacing the set is the standard practice in repair shops because a partial replacement usually means opening the set again within a year.
Q. Is this a job for a hobbyist?
It is a chassis-level repair: back cover, stand, bezel, panel frame and diffuser sheets all come apart, and the panel is fragile. If you have not opened a television before, budget for a repair shop. The kit is aimed at technicians and confident DIYers.
Q. What tools are needed?
A plastic pry set, a screwdriver matching the chassis screws, and clean gloves for the diffuser sheets. Avoid touching the reflective sheets with bare hands, since fingerprints show as bright patches after reassembly.
Q. Will brightness match the original?
The bars are built to the same 3 V, 12-LED configuration, so brightness and color temperature match the original design. If you mix this set with old bars, expect visible unevenness across the panel.
Q. What if a bar arrives damaged?
Photograph the bar and packaging within seven days and it is replaced. Do not bend the aluminum bar to test it; the LED solder joints are the fragile point.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
