Description
Steel does not apologize. It does not negotiate. It holds the line while the rest of the world shifts around it. A vehicle suspended in the air is an act of trust — between mechanic and machine, between gravity and engineering. The Goliath ratcheting axle stands are the silent guardians of that trust, forged to bear three tons of certainty when certainty is the only currency that matters.
Most axle stands on the market are stamped from thin-gauge steel that buckles under the first real load. The Goliath defies that tradition with a ratcheting mechanism machined from hardened alloy steel, paired with a wide-stance base that distributes pressure across a footprint 40% larger than industry standard. The height adjustment range — from 11.5 inches to 16.5 inches — covers everything from low-clearance sedans to lifted off-road rigs. Every tooth on the ratchet bar is induction-hardened, tested to 150% of rated capacity before it leaves the factory floor.
This is not a pair of jack stands. It is a declaration that your workspace will not compromise on safety. Whether you are rotating tires in a home garage, performing brake work on a fleet vehicle, or supporting a chassis during a full suspension rebuild, the Goliath stands between you and the ground with the quiet confidence of something built right the first time.
Gravity does not respect shortcuts. Neither do we.
Key Features
- ✦ 3-Ton (6,000 lb) per-stand rated capacity — supports full-size trucks and SUVs with confidence
- ✦ Ratcheting pawl mechanism with dual safety lock pins — no hydraulic drift, no slow failure
- ✦ Height adjustable from 11.5" to 16.5" — 7 locking positions across a 5-inch range
- ✦ Extra-wide pyramid base (9.5" x 7.5") with anti-slip rubber pads — stable on concrete, asphalt, and gravel
- ✦ Induction-hardened ratchet teeth tested to 150% rated load — structural integrity without deformation
- ✦ Heavy-gauge welded steel construction with corrosion-resistant powder coat finish
Technical Specifications
- Load Capacity: 3 Ton (6,000 lbs) per stand — 6 Ton per pair
- Height Range: 11.5" — 16.5" (292 mm — 419 mm)
- Base Dimensions: 9.5" × 7.5" (241 mm × 190 mm)
- Material: Heavy-gauge alloy steel with powder coat finish
- Locking Positions: 7 ratchet steps
- Saddle Type: Flat top with anti-slip ridges
- Package Includes: 2 × Ratcheting Axle Stands
- Certification: CE certified, meets ASME PASE-2019 safety standards
Application Scenarios
From the weekend warrior rotating tires on a Jeep Wrangler to the professional technician performing transmission drops in a commercial shop, the Goliath axle stands earn their place wherever a vehicle must leave the ground. They excel in home garages with uneven concrete floors, where the wide pyramid base compensates for surface imperfections that would destabilize narrow-footprint competitors. Fleet maintenance operations — delivery vans, landscaping trucks, service vehicles — rely on the Goliath's consistent ratcheting action across hundreds of lift cycles per month. Off-road enthusiasts trust them on trail-side repairs where the ground is anything but level, and the penalty for failure is measured in hours of tow-truck wait time. They are equally at home under a classic car restoration project that spends months on stands, where the powder coat finish resists the rust and corrosion that plagues raw steel in humid garage environments.
Frequently Asked Questions
Q: Are these axle stands suitable for lifted trucks with 35-inch tires?
A: At their maximum extension of 16.5 inches, the Goliath stands provide sufficient clearance for most light trucks and SUVs, including those with moderate lifts. For vehicles with extreme lifts (6 inches or more), a taller stand or supplemental blocking may be required. The 3-ton per-stand rating comfortably handles full-size trucks weighing up to 6,000 lbs per axle.
Q: How do these compare to pin-style jack stands?
A: Ratcheting stands offer faster, one-handed height adjustment compared to pin-and-hole systems that require aligning holes and inserting pins under load. The dual safety lock on the Goliath — both the ratchet pawl and a secondary locking pin — provides redundancy that single-lock designs lack. However, ratcheting mechanisms require periodic cleaning and lubrication to maintain smooth operation, especially in dusty or muddy workshop environments.
Q: Can these be used on asphalt driveways without sinking?
A: The wide 9.5" × 7.5" base significantly reduces ground pressure compared to narrow-base stands. On hot summer days when asphalt softens, we recommend placing a 12" × 12" plywood sheet under each stand as an additional precaution. The rubber anti-slip pads are designed for hard surfaces — on soft ground like dirt or grass, plywood is mandatory.
Q: What is the minimum working height?
A: The Goliath stands collapse to approximately 11.5 inches, making them compatible with most passenger vehicles including sedans and coupes. The flat saddle top with anti-slip ridges accommodates both frame rails and pinch welds with appropriate adapters.
Q: Are these CE certified?
A: Yes, the Goliath axle stands carry CE certification and are manufactured to meet ASME PASE-2019 safety standards for portable automotive service equipment. Each batch undergoes load testing at 150% of rated capacity before packaging — a quality gate that budget stands routinely skip.
Customer Reviews
Payment and Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.