Beschreibung
A dashcam only earns its price in the two minutes before an incident and the twenty minutes after, when the car is parked and nobody is watching. That second part needs power the cigarette lighter cannot give once the ignition is off. This is the hardwire kit that keeps a DDPAI camera recording through a parked night, at a voltage it will not drain the battery below.
The kit comes in three fits rather than one, and the difference matters. The hardwire kit taps a fused circuit in the car and runs the camera at low current while the vehicle sleeps, with a cutoff that stops drawing before the battery drops too low to start. The OBD kit takes the same job through the diagnostic port, which is a plug-in installation with no fuse tap and no trim removal, and the Z40, Z50 and N5 variant covers the older body cameras in the range. Compatibility is listed against the Z60, Z60 Pro, Mini2X, Z50 Pro, A400 and Z90 series, so check the model printed on the back of the camera before choosing a variant.
The hardware itself is a small module and a length of cable, weighing around 100 grams, and the point is that it disappears. No cable across the dashboard, no adapter wobbling in a socket, no camera unplugged by a passenger's knee. Certified CE and FCC, powered from the car rather than a battery of its own, which is why it keeps working in heat that would cook a lithium pack left on a windscreen.
Parking mode is a promise the camera cannot keep on its own. This is the part that keeps it.
What Makes It Different
- ✦Keeps a DDPAI dashcam recording in parking mode after the ignition is off
- ✦Hardwire, OBD and Z40/Z50/N5 variants, each a plug-in fit
- ✦Low-voltage cutoff protects the car battery from being drained flat
- ✦OBD version installs through the diagnostic port with no fuse tap
- ✦No cable across the dashboard, no adapter in the lighter socket
- ✦Runs from the vehicle supply, so no internal battery to cook in summer
- ✦CE and FCC certified, around 100 g for the module and harness
Technical Specifications
- TypeDashcam hardwire and OBD power kit
- Compatible CamerasDDPAI Z60, Z60 Pro, Mini2X, Z50 Pro, A400, Z90 series
- VariantsHardwire kit, OBD hardwire kit, Z40/Z50/N5 kit, OBD for Z90
- Power SourceVehicle 12 V supply, corded
- Function24 hour parking monitor with low-voltage protection
- Weight0.1 kg
- CertificationCE, FCC
- Chipset ReferenceSigmaStar platform cameras
- Frame Rate SupportUp to 30 fps on supported models
- BatteryNone in the kit itself
Where It Earns Its Place
Anyone who parks on a street, in a shared car park or on a driveway where door dings and hit-and-runs are a monthly event. Fleet and van operators fit the OBD version because it takes minutes per vehicle and leaves no trace to argue about at resale. Rideshare and delivery drivers use parking mode as evidence when a passenger dispute starts after the shift ends. The hardwire variant suits the owner who wants the cleanest possible installation and does not mind tapping a fuse, while the OBD variant suits the lease car that has to go back exactly as it arrived.
The EastSupplier Promise
Sourced directly from vetted manufacturing partners, inspected before dispatch, and priced without distributor layers. If the item arrives outside specification, we replace it or refund it. Every listing on this store is curated by a human buyer, not bulk-imported and abandoned.
Questions Buyers Actually Ask
Q: Which variant do I need for my camera?
Match the model on the back of the camera to the listing. The Z60, Z60 Pro, Mini2X, Z50 Pro and A400 take the standard hardwire or OBD kit, the Z90 series takes the dedicated OBD kit, and the older Z40, Z50 and N5 bodies take their own variant. If the model is not on the list, ask before ordering.
Q: Will it drain my car battery?
The kit is designed for parking mode with a low-voltage cutoff, so it stops drawing before the battery falls too far to crank. That protection assumes a healthy battery. On a tired one, shorten the parking window in the camera settings rather than relying on the cutoff.
Q: Does the OBD version need any tools?
No. It plugs into the diagnostic port under the dash and routes the cable behind trim by hand. The hardwire version needs a fuse tap and access to the fuse box, which is a twenty minute job for someone comfortable with a trim tool.
Q: Does it work with a camera I already own?
Only if it is a DDPAI model on the compatibility list, because the connector and the parking-mode signalling are camera specific. It is not a universal USB power lead.
Q: Can I leave parking mode running all week?
Continuous multi-day parking is where a car battery suffers, even with a cutoff. For a week at an airport, check the camera's parking mode timer and set it to the hours you actually need, or use a dedicated dashcam battery pack.
Q: What is in the box?
The power module with its harness, the connector for the camera, and the fuse tap or OBD plug for the variant you choose. The camera itself is not included.
Customer Reviews
Payment and Security
Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.