Beschreibung
Every Photon Is Currency. Maximize the Exchange Rate.
The sun delivers 173,000 terawatts of energy to Earth continuously — enough to power human civilization 10,000 times over. But a solar panel alone captures only potential. The charge controller is the intelligence layer that converts raw sunlight into usable, stored, dispatchable power. The MPPT Solar Charge Controller does not merely regulate voltage — it executes continuous maximum power point tracking, algorithmically hunting the optimal current-voltage curve of your array and extracting every watt the sun has to offer, irrespective of cloud cover, panel temperature, or battery state of charge.
Available in 60A, 80A, and 100A configurations with a 160Vdc maximum PV input, this controller supports 12V, 24V, 36V, and 48V battery systems — LiFePO4, AGM, Gel, and Flooded — with automatic voltage detection. The parallel-capable architecture means you can scale your system incrementally: start with a cabin off-grid setup, expand to a full residential array, and link multiple controllers without replacing hardware. The high-voltage MPPT topology delivers 30% more energy harvest than PWM controllers in the same conditions, particularly during low-light mornings and overcast afternoons when every watt-hour matters.
An integrated RS485 communication port and optional WiFi module enable remote monitoring of input power, load consumption, battery temperature, and historical generation data. Whether you are powering a remote telecommunications tower, a marine vessel, or a self-sufficient homestead, this is the quiet, relentless intelligence that turns photons into freedom.
The sun does not send a bill. But you still need to collect everything it offers.
Key Features
- ✦ Advanced MPPT algorithm with 99.5% peak conversion efficiency — 30% more harvest than PWM controllers
- ✦ Wide PV input range up to 160Vdc — enables high-voltage series string configurations for reduced wiring cost
- ✦ Multi-chemistry support: LiFePO4, AGM, Gel, Flooded, and user-defined charging profiles
- ✦ Parallel-capable: link multiple controllers for scalable installations without controller replacement
- ✦ RS485 communication with optional WiFi/Bluetooth module for remote monitoring and data logging
- ✦ Automatic 12V/24V/36V/48V battery system detection with temperature-compensated charging
- ✦ Comprehensive electronic protection: overcharge, over-discharge, reverse polarity, short circuit, over-temperature
Technical Specifications
- Model Options: 60A, 80A, 100A
- System Voltage: 12V / 24V / 36V / 48V (auto-detection)
- Max PV Input: 160Vdc
- MPPT Efficiency: Up to 99.5% peak
- Battery Compatibility: LiFePO4, AGM, Gel, Flooded, User-defined
- Communication: RS485, optional WiFi/Bluetooth module
- Parallel Support: Yes — multiple controllers can operate in the same system
- Protection: Overcharge, over-discharge, reverse polarity, short circuit, over-temperature
- Cooling: Passive convection — silent, no moving parts
- Application: Residential off-grid, RV, marine, telecom, remote monitoring stations
Application Scenarios
Engineered for residential off-grid solar systems, RV and marine installations, remote telecommunications equipment, and agricultural water pumping stations that demand reliable, maintenance-free power conversion. The high-voltage input range (160Vdc) is particularly valuable for installations where the PV array is located far from the battery bank — higher voltage means lower current, thinner copper, dramatically reduced wiring cost. Parallel-capable architecture means a 12kW system can be built with three 100A controllers rather than one oversized unit, providing N+1 redundancy for mission-critical applications. The multi-chemistry charging profiles make it suitable for lithium battery upgrades to existing lead-acid systems without controller replacement.
Frequently Asked Questions
Q: Can I use this controller with a 48V LiFePO4 battery bank?
A: Yes. The controller automatically detects 12V, 24V, 36V, and 48V systems and includes dedicated LiFePO4 charging profiles with temperature compensation. Simply connect your battery first, and the controller configures itself.
Q: How many solar panels can I connect?
A: The 160Vdc maximum PV input lets you connect panels in series up to that voltage limit. For example, four 40V open-circuit panels in series would reach 160Vdc. The 100A current rating determines how many parallel strings you can connect — approximately 5kW of solar at 48V.
Q: What does MPPT mean and why does it matter?
A: Maximum Power Point Tracking continuously adjusts the electrical operating point of your solar array to extract the maximum available power. PWM controllers simply connect the panel to the battery, wasting voltage difference as heat. MPPT can harvest 20-30% more energy from the same panels.
Q: Can I run two controllers in parallel for more power?
A: Yes. These controllers support parallel operation. Each controller manages its own array independently, and they share the common battery bank. This is ideal for scaling your system over time or building redundant off-grid power systems.
Q: Is there a mobile app for monitoring?
A: With the optional WiFi/Bluetooth module, you can monitor real-time power generation, battery state, load consumption, and historical data via smartphone app. Without the module, RS485 supports integration with third-party monitoring systems like Home Assistant and Victron Cerbo GX.
Customer Reviews
Payment and Security
Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.
