Beschreibung
The bolt does not care how long you have been doing this. It cares about torque, and torque is a promise a tool either keeps or does not. The Iron Torque is built to keep it, at 1800 newton-metres, without the heat and the brush wear that shorten the life of an ordinary electric wrench.
Inside sits a brushless motor rated to 7000 rpm, driving a half-inch square anvil through a gearset designed for sustained load rather than a single heroic pull. Brushless construction is not a marketing phrase here: it means fewer friction losses, a longer service life and a motor that stays efficient as the battery drains. Because the tool accepts Makita 18V batteries, the packs and chargers already sitting in most workshops and garages can be used directly, which is the single biggest cost saving in the category.
The wrench is offered in several configurations so it can be matched to the work rather than the other way around: one-battery and two-battery kits, plastic case or carton packaging, and bare-tool options when you already own the platform. With 1800 newton-metres available on demand, hub nuts, suspension bolts, mower blades and stubborn chassis fasteners stop being a fight.
This is not a wrench. It is the moment a seized fastener stops being a problem.
Torque is only half of the story, and the half that gets advertised. The rest is control, and control is what makes a high-output wrench usable rather than merely powerful. Variable speed through the trigger lets the operator start a fastener gently, seat it by feel, and then apply full force only when the threads are engaged and the tool is square to the work. That progression is what prevents cross-threading, snapped studs and rounded heads, the three most expensive mistakes in automotive and machinery work. With a brushless motor holding its efficiency under load and a half-inch anvil built for the surge, the tool stays predictable from the first turn to the last.
Key Features
- ✦ 1800 N-m of maximum tightening and loosening torque
- ✦ Brushless motor rated to 7000 rpm for sustained efficiency
- ✦ Half-inch square drive anvil with pin detent retention
- ✦ Compatible with Makita 18V battery platform
- ✦ LED work light for shaded engine bays and underbody work
- ✦ Available as bare tool, single-battery or two-battery kits
- ✦ Choice of plastic carry case or carton packaging
Technical Specifications
- Brand: Gisam
- Motor: Brushless
- Maximum Torque: 1800 N-m
- No-Load Speed: 7000 rpm
- Drive Size: 1/2 inch square
- Rated Voltage: 18V
- Battery Platform: Makita 18V compatible
- Battery Included: Varies by configuration (bare tool, 1 battery or 2 batteries)
- Typical Use: Automotive, workshop, home DIY
- Certification: CE
Application Scenarios
This wrench is aimed at the mechanic who spends his day on hubs and suspension, the farmer who services his own machinery, and the home DIY owner who has a Makita battery wall in the garage and no interest in buying another charging system. It is the tool you reach for when a breaker bar and a length of pipe have already failed, and it is equally at home on mower blades, trailer hitches and stubborn chassis bolts. Because bare-tool versions are offered, workshops with an existing 18V platform can add capacity at the lowest possible cost.
Frequently Asked Questions
Q: Does it really deliver 1800 N-m?
A: Yes. The rated maximum output is 1800 newton-metres, produced by the brushless motor through the half-inch square drive. Real-world numbers depend on the battery pack condition and charge level.
Q: Which batteries does it use?
A: The tool runs on the Makita 18V battery platform. If you already own Makita 18V packs and a charger, you can order the bare-tool version and use them directly.
Q: What is included in the bare tool option?
A: The bare tool ships as the wrench by itself, allowing you to use batteries you already own. Single-battery and two-battery versions add packs, and the kit is available in a plastic case or a carton depending on the configuration you choose.
Q: Is it suitable for removing wheel nuts?
A: Yes. Wheel nuts, hub nuts and suspension fasteners are exactly the class of task this torque output is intended to handle. Always re-torque critical fasteners with a calibrated torque wrench afterwards.
Q: Why is a brushless motor better here?
A: Brushless motors have no carbon brushes to wear out, run cooler under load and maintain efficiency as voltage sags, which matters on long bolt runs where a brushed tool would slow and heat up.
Q: Does it have a work light?
A: Yes. An integrated LED illuminates the fastening point, which matters when you are working inside a wheel arch or under a vehicle.
Q: How long does a battery pack last under load?
A: Run time depends on the pack capacity and the type of fastening. Tightening a set of wheel nuts is a matter of seconds per nut, so a standard 18V pack handles a full vehicle in one charge; heavy continual loosening of seized fasteners will draw down faster.
Q: Does the tool come with a socket?
A: The wrench ships with the tool and its packaging. Sockets are not included, so order a half-inch impact-rated socket set to match your fasteners, as impact sockets are hardened differently from hand-tool sockets.
Customer Reviews
Payment and Security
Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.