Globauto Manuelle Blechschrumpf-/Streckmaschine 16/18 Gauge Fertigung 2 Einheiten Industrie

East Supplier PlatformArtikelnummer:1005003409136670-China Mainland

Preis:
$597.18

Steuern inklusive Versand wird an der Kasse berechnet

Aktie:
Auf Lager

Beschreibung

SPEZIFIKATIONEN

Markenname: Globauto

Heimwerkerbedarf: Metallbearbeitung

Besonders relevante Chemikalie: Keine

Herkunft: Festlandchina

Typ: Andere

Manuelle Metallschrumpf-/Streckmaschine 16/18 Gauge Fertigung 2 Einheiten Industrie

Metallschrumpf- und Streckmaschine

• Dies ist die perfekte Maschine für die Metallbearbeitung von Auto-, Fahrrad- oder Flugzeugkarosserien. Diese Maschine ist robust gebaut und kann Metall bei voller Kapazität mühelos schrumpfen oder strecken.

• Ideal für Reparaturarbeiten an Radeinlässen, Türrahmen, Windschutzscheiben und Kofferraumrinnen

• Die Schrumpfmaschine kontrahiert Blech für Innenkurven

• Die Streckmaschine dehnt Blech für Außenkurven

• Beide können Kurven mit einem Radius von nur 76 mm/3'' formen

• Lieferumfang: 2 Gehäuse, 1 Satz Schrumpfbacken, 1 Satz Streckbacken, 2 Griffe

• Kapazität (mm/Ga): 1,2/18 Weichstahl, 1,5/16 Aluminium

• Ausladung (mm//Zoll): 25,4 // 1

• Vollständig tragbar

• Befestigungslöcher in der Basis

• Kann im Schraubstock gehalten werden

• Gehärtete Arme und Drehzapfen

• Wechsel von Streck- zu Schrumpfmaschine in Sekunden

• Verpackungsmaße (cm): 35 x 19 x 9

• N.W./G.W. (kg): 9,6/10,5


Customer Reviews

Customer Reviews

Based on 5 reviews
60%
(3)
40%
(2)
0%
(0)
0%
(0)
0%
(0)
A
Anaïs G.
Honest capacity for 16 and 18 gauge

The spec sheet says 1.5mm aluminium and it does 1.5mm aluminium without jaw chatter, which is more than I can say for the cheap pair I replaced. Mounting it to a bench post took ten minutes. The jaws will mark soft aluminium if you are careless, so tape the panel first, and the bodies are heavy enough that you want them bolted down rather than clamped.

P
Pieter V.
Both bodies in one kit is the entire point

A compound curve needs the panel gathered and then spread, and having the shrinker and stretcher share the same throat geometry means I stop switching machines mid-panel. I have been shaping 1.2mm mild steel for a motorcycle tank and both bodies bite at full jaw depth, not just at the edge. The handles are long enough to work without my forearms giving out.

M
M. Kowalski
Buy the pair, budget for mounting

Quality is solid and the packing was compact with no damage. Do not expect it to work well clamped to a wobbly bench, because the finish on thin alloy shows every bit of flex. Well priced for what it does.

R
Rob D.
Both directions in one set

Having the shrinker and the stretcher on the same throat depth means I stopped swapping between two machines mid panel. Jaws handle 18 gauge steel without complaint. Mounting them to a solid bench mattered more than I expected.

K
Kenji A.
Made short work of a wheel arch

Reproducing a rusty wheel arch lip on a classic. The shrinker gathered the curve in a few passes and the aluminium I formed afterwards stayed smooth. Hand operation gives the control that a powered tool loses.

Payment and Security

PayPal

Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.

Versand schätzen

You may also like

Recently Seen