20/100 Stk. Pneumatische Fittings Kunststoffverbinder PU 4mm 6mm 8mm 10mm für Luftwasserschlauch Rohrleitung Push-in Gerader Gas-Schnellanschluss

East Supplier PlatformArtikelnummer:1005006155482344-PU-4-100 PCS

Farbe: PU-4
Preis:
$55.84

Steuern inklusive Versand wird an der Kasse berechnet

Aktie:
Auf Lager ( 9980 Einheiten), versandbereit

Beschreibung

SPEZIFIKATIONEN

Markenname: NoEnName_Null

Herkunft: Festlandchina

Typ: Fittings

Modellnummer: PU/PG

Pneumatische Fittings PU 10mm 8mm 6mm 12mm 4mm Luft-Wasser-Schlauchrohr One Touch gerade Steckfittings Kunststoff-Schnellkupplung Rohr Rohr Kunststoff-Schnellkupplungsfittings Passend für Rohr

Größe: 4mm 6mm 8mm 10mm 12mm 14mm 16mm Schlauchrohr

Betriebsdruck: 0~1Mpa

Betriebstemperaturbereich: 0~60℃

Fluidtyp: Luft / Vakuum Passend für Rohr

Material: PU/PE/Nylon, Polyurethan Schnellkupplung

Material: Kunststoff

Customer Reviews

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
A
Anna Z.
Good quality, wish they had more thread options

Ordered the 100-pack of 6mm for a laboratory vacuum system (SEM sample prep station). The -99kPa rating is accurate — held vacuum at -95kPa for a 48-hour leak-down test with less than 2kPa drift. The push-to-connect is genuinely one-handed, which matters when you are repositioning vacuum lines inside a glove box. Only giving 4 stars because the thread selection is limited to BSPT/BSPP/NPT — metric M5 fine thread would be useful for European lab equipment. Otherwise excellent.

L
Lars E.
Finally, push-fits that survive compressor oil

My facility uses oil-lubricated screw compressors, and standard nylon push-fits would embrittle and crack within 18 months. These PBT fittings have been in service for 4 months on the main 8-bar ring main, and a cutaway inspection of a sample fitting showed zero material degradation — the O-ring was still supple, the collet still sharp. The FKM seal is the real upgrade: standard NBR O-rings swell from synthetic oil mist and eventually extrude. I am standardizing on these across all 3 of our plants.

K
Kevin P.
Replaced every fitting in my CNC shop with these

I run 8 CNC routers with pneumatic tool changers and vacuum hold-down. Leaks were costing me roughly $300/month in compressor electricity — I tracked it with a flow meter at the receiver tank. Swapped every push-fit in the shop (about 120 fittings, mix of 6mm and 8mm) to these Airweave PBT units. Leak rate dropped from 12% to under 2%. The stainless collet grip is noticeably stronger than brass push-fits — tubing seats firmly and does not creep out under vibration. The 100-pack pricing makes this a no-brainer for anyone maintaining a production floor.

Zahlung und Sicherheit

PayPal

Ihre Zahlungsinformationen werden sicher verarbeitet. Wir speichern keine Kreditkartendaten und haben keinen Zugriff auf Ihre Kreditkarteninformationen.

Versand schätzen

Sie können auch mögen

Kürzlich gesehen